Question about 2002 Isuzu Rodeo

Open Question

When turning on turn signals on and turning on hazzard light the signals will not work

Low beam lights not working

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
allinbilly
  • 14 Answers

SOURCE: How do I replace the Isuzu trooper 2001 headlamp?

Locate the headlamp under the hood. Disconnect the plug, unsrew the cap turning it counter-clockwise, pull the bulb out of the headlamp body.

Posted on Feb 21, 2009

Ad
  • 16 Answers

SOURCE: no turn signals, no tail lights and fuses are good

Replace the non-working tail light bulb. Try replacing the bulbs for the turn signals. If that doesn't work, replace the relay.

Posted on May 24, 2009

arauzvictor1
  • 466 Answers

SOURCE: Hello, I have 2004 ascender my low beam lights are

test fuse 3y6 10amp if they are well test the relay headlamp that is in the driver modulates relay 46. If this is well the problem this in the body control modulates

Posted on Jan 01, 2010

  • 121 Answers

SOURCE: My sister turned her headlights on and off to say

try replacing the headight switch

Posted on Mar 15, 2010

  • 387 Answers

SOURCE: When pushing the turn signal lever up to make a

check the flasher, you may have to replace it.

Posted on Apr 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver low beam not working.


What make model an year vehicle ?

Feb 24, 2015 | Cars & Trucks

1 Answer

I have a problem with the low beams on my headlights. The high beams works just fine. All of the other lights(turn signal, emergency lights, etc.) work except for the low beams.


Check the fuses first. then replace the turn signal switch if all fuses are good. All the lights run threw it, except the high brake light on the rear.

Jan 01, 2015 | 2003 Ford Escape

1 Answer

Low beams wont turn on brights will


check that you have power from the light switch to the relays to trigger the relay to turn the lights on. IT may be a faulty light switch--- fuse --light module control unit.

Jan 28, 2014 | 2009 Saturn VUE

1 Answer

My 1984 chevrolet silverado high beams lights works and low beam lights, turning lights, emergency light and brakes lights don't work. I need help!


Those lights are on different circuits. The high and low beam lights are powered thru the headlight switch, the turn signals, brake, and hazards go thru the turn signal switch.
I would want to know if each circuit has power at the switch that controls it.

Jun 28, 2013 | Cars & Trucks

2 Answers

Dodge ram 3500 turn signal - headlight problem


WAY TO GO !!! another "great idea" from vehicle manufactures

Jun 07, 2012 | 2004 Dodge Ram 3500 Truck

1 Answer

My light problem is i have low beam on right side no low on left side i turn highs on and right side goes out and high on left turns on then when back to lows beams and i pull turn signal to flash high...


If you have separate bulbs for the low and high beams(4 light system), if you pull the turn signal and hold it, all 4 lights will stay on until you release the turn signal. You need to replace the bright bulb on the right side and the low bulb on the left side. If your headlights only have one bulb on each side, then you will have to replace both of them to get everything to work.

Jan 04, 2011 | 2000 Ford Mustang

1 Answer

2001 Ford Focus - High beam / low beam problem with headlights


just replace the dimmer switch under the column its wore out on the low beam side

Jan 17, 2010 | 2005 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14380 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...