Question about Nissan Frontier

1 Answer

2002 Nissan Frontier showing a P01444 code - Frontier Nissan Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Nissan Master
  • 443 Answers

P1444 EVAP Canister Purge Volume Control Solenoid Valve
This system controls flow rate of fuel vapor from the EVAP canister. The opening of the vapor by-pass passage in the EVAP canister purge volume control solenoid valve changes to control the flow rate. The EVAP canister purge volume control solenoid valve repeats ON/OFF operation according to the signal sent from the ECM. The opening of the valve varies for optimum engine control. The optimum value stored in the ECM is determined by considering various engine conditions. When the engine is operating, the flow rate of fuel vapor from the EVAP canister is regulated as the air flow changes.

Posted on Feb 11, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 5 Answers

SOURCE: 2002 Nissan Frontier timing belt

Timing belts are found on the 3.3L engines, timing chains are on the 2.4L engines. The 2002 3.3L Timing belt is changed at 105K during the major service. This service can run over one thousand dollars. It is recommended to replace the belt, tensioner and idlers, cam and crank seals, water pump, and both belts when changing the timing belt. That way, you only open up the front of the engine every 105K. Why change the timing belt and have a water pump start leaking only 20K later and ruin the belt with antifreeze? Other items during the 105K are a major tune up with all the fluids changed and a lube. This does get expensive. You can break it up into several blocks of time and spread the related service items out over a few months to take some of the sting off.

Posted on Feb 07, 2009

  • 6 Answers

SOURCE: 2002 NISSAN FRONTIER

sounds like a problem in the egr valve or the porting through the egr valve or maybe a vaccuum line that has something to do with monitoring it. make sure there are no vacuum lines near it that are leaking and is there a difference in the idle that you may notice.

Posted on Feb 26, 2009

  • 3640 Answers

SOURCE: engine repair code P0325

po325--ignition system or missfire.

Posted on Sep 16, 2009

  • 14036 Answers

SOURCE: nissan frontier 2002 failed emissions test with

CODE PO447 EVAP CANISTER VENT CONTROL VALVE CIRCUIT OPEN.POSSIBLE CAUSES. 1.HARNESS OR CONNECTORS THE SOLENOID VALVE CIRCUIT IS OPEN OR SHORTED. 2. EVAP CANISTER VENT CONTROL SOLENOID VALVE.

Posted on Jan 07, 2010

  • 14585 Answers

SOURCE: 2000 nissan frontier knock sensor code & distributor

no but the knock sensor does send a signal the ecm and it will ****** or advance the distributor timing

Posted on Jun 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 nissan frontier crew cab 4x4 vg33 how to install a idle control vavle


Just type in on pc, 02 nissan frontier 4x4 vg33 to insall idle air control valve. I think the manifold has to come off to get to valve, it is under manifold. When page comes up, just click on nissan part 2 to watch the video on the valve. God-Bless you and your family! The video shows the removal and instalation

Nov 02, 2016 | 2002 Nissan Frontier Crew Cab

1 Answer

How do you remove a starter on a 4 wheel drive 2002 Nissan frontier???


How to replace a starter on a 2000 nissan frontier v6 3.3L ...

? 3:14
www.youtube.com/watch?v=ibyIqgGeIug
Jan 6, 2013 - Uploaded by Raul Romo I show how To replace a starter on a 2000 Nissan frontier Part 1. ... and solenoid plug from under the rubber splash guard in thewheel well.

Oct 07, 2015 | 2002 Nissan Frontier Crew Cab

1 Answer

Troubleshooting Nissan frontier egr code


Replace the EGR valve. EGR is Exhaust Gas Recirculation valve and you'll lose a lot of power if the valve is bad.

Jul 30, 2014 | 2002 Nissan Frontier Crew Cab

2 Answers

Location of Crankshaft Position Sensor 2002


in the rear of the engine on the drivers side at the top of the transmission bell housing

Jul 08, 2010 | 2002 Nissan Frontier Crew Cab

1 Answer

Nissan frontier 2002 failed emissions test with code P0447 something to do with service engine soon light. how do i fix this?


CODE PO447 EVAP CANISTER VENT CONTROL VALVE CIRCUIT OPEN.POSSIBLE CAUSES. 1.HARNESS OR CONNECTORS THE SOLENOID VALVE CIRCUIT IS OPEN OR SHORTED. 2. EVAP CANISTER VENT CONTROL SOLENOID VALVE.

Jan 07, 2010 | 2002 Nissan Frontier Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...