Question about 1998 Honda Passport

1 Answer

What is the head bolt torque specs for a 1998 honda passport 3.2l

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 20,706 Answers

You will need that and the sequenced and if the old bolts are TTY
torque to yield. and don't mix left. and right gaskets.
(the correct question?)


1- Step 1: 21 ft. lbs. Step 2: 47 ft. lbs. STAGED !


use alldata.com
below is the bolt sequence order. no tty mentioned. but????
6137
front---------------rear
5248

Posted on Feb 11, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14036 Answers

SOURCE: need torque spec. for 91 honda crx head bolts

47 FT LBS TORQUE.is for the 1.5 and 1.6 engines 2.2 is 78 ft lbs and the 2.0 -2.1 is 49 ft lbs. the crx engine is 47 ft lbs

Posted on May 03, 2009

daves944
  • 1050 Answers

SOURCE: I have a 1990 honda civic. I just changed the head gasket

The book say to do it in 2 steps up to 48 ft-lbs. Personally, I would do it in 3 steps, 15, 35, and then 48. Start in the middle of the head and criss cross out to the ends, and repeat.

Posted on May 18, 2009

  • 12 Answers

SOURCE: head bolt torque specs for 200 honda accord 3.0

its a three step process 1st 29ft/lbs 2nd 51ft/lbs 3rd 72.3ft/lbs

Posted on Apr 25, 2010

  • 4 Answers

SOURCE: Torque specs for head bolts, 1990 Honda prelude si

49lbs I believe but it should tell you in the manual or goto a Kragen store and just flip thru a Haydem or Chilton repair book real quick.

Posted on May 03, 2010

  • 1 Answer

SOURCE: 1995 honda passport head torque specs

What is the degree setting for the1995 Honda Passport 3.2 v6?

Posted on Jun 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need torque specs for bolts on head of my 2002 honda civic ex v-tech 1.7 engine. just fixed them about a week ago and have to fix them again


Hello claudian1535,

Below is an image showing the torque sequence. The torque procedure is a three step process:

Step one torque all head bolts to 14 ft.lbs.
Step two torque all head bolt to 36 ft.lbs.
Step three torque all head bolts 49 ft.lbs.


netvan_116.png

I hope this helps.

Regards,

netvan

Jul 21, 2011 | Honda Civic Cars & Trucks

1 Answer

I need the tork spec on 1998 Buick 3800 block for the cylinder head.


hope this helps,

Torque sequence --------- front ' 6 1 3 7 ' of ' ' engine ' 8 4 2 5 ' --------- Step 1: torque bolts in sequence to 37 Ft/Lbs Step 2: torque all bolts in sequence an additional 120 degrees Step 3: torque bolts 1,2,3, & 4 an additional 30 degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.
always torque from center
Tighten each bolt an additional 90° in sequence.


0996b43f8021ae77.jpg

Jun 18, 2011 | 1998 Buick LeSabre

1 Answer

Torque on front ball joints 2000 Honda Passport 2 wheel drive


Lower ball joint specs:
Torque the ball joint-to-control arm nuts/bolts to 85 ft. lbs. (115 Nm). Torque the castellated nut to 108 ft. lbs. (147 Nm).

Upper ball joint specs:
Tighten the mounting bolts to 42 ft. lbs. (57 Nm) and the castellated nut to 72 ft. lbs. (96 Nm).

Feb 28, 2011 | 2000 Honda Passport

1 Answer

1995 honda passport head torque specs


What is the degree setting for the1995 Honda Passport 3.2 v6?

Nov 04, 2010 | 1995 Honda Passport

3 Answers

Need to know the head bolts torch specs on 98 toyota v6


heres the torque specs and the way to tighten the head bolts for your 1998 toyota sienna, hope this helps,
12 point bolts step 1- 40 ft lbs
step 2- additional 90 degrees
recessed bolt 13 ftlbsaf151d2.gif

May 12, 2010 | 1998 Toyota Sienna

1 Answer

Head bolt torque specs for 200 honda accord 3.0


its a three step process 1st 29ft/lbs 2nd 51ft/lbs 3rd 72.3ft/lbs

Oct 08, 2009 | 1993 Honda Accord

2 Answers

Torque specs for toyota tercel


Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using6bd0ae1.jpg FixYa. Roger

Apr 08, 2009 | 1998 Toyota Tercel

1 Answer

Torque specs for 1998 tercel 1.5L


Main Bearing Cap Torque-42 Ft. Lbs.
Head Bolts Step 1-33 Ft. Lbs. Step 2- Additional 90 Degrees
Rod Bearing Nuts-29 Ft. Lbs.

Hope this helps

Apr 08, 2009 | 1998 Toyota Tercel

1 Answer

Torquing head


The 98 Corolla has a "torque-to-distance" spec.

First, torque all 10 bolts to 36 ft lbs (49 NM or 500kgf-cm), in a clockwise fashion, starting with the 2 center bolts.

Second, mark the bolts with a paint mark, and then torque each of the 10 bolts an additional 90 degrees.

Hope this helps, and thanks for choosing FixYa.

Nov 15, 2008 | 1998 Toyota Corolla

Not finding what you are looking for?
1998 Honda Passport Logo

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...