Question about 2001 Toyota Sienna

1 Answer

How much does it cost to replace spare tire hoist mount?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 20,706 Answers

The parts & labor
both vary by location, (unstated)
so?
wild guessing, no photos posted of damage, etc.

i can't post exact link because this silly forum , thinks links
are NON English.
search "spare" at toyota parts store. online.

this part is $99 USA, (random store)
and labor would be $100 at a stealership. with 100/hr rate
and 1hr. min rules.
in a mom and pop shop , maybe $25.
asking prices is useless,
why not get quotes from your locals.
online, , you might get quotes from Viet nam
or who knows? all useless info.

http://www.toyotaoempartsworld.com/partlocator/index.cfm?siteid=215233

Posted on Feb 23, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the spare on the 1997 Blazer


Welcome to FIxYa.com


rear of truck under neath frame


Regards, Lee Davidian


Thank you for using FixYa,com.

Oct 23, 2010 | 1997 Chevrolet Blazer

1 Answer

I can't get the spare tire out of the rack? 2004 yukon


  • Rotate the hoist shaft counterclockwise in order to lower the spare tire to the ground. Continue to rotate the shaft until the spare tire can be pulled out from under the vehicle and removed. If the spare tire does not lower to the ground, the secondary latch is engaged causing the tire not to lower.
  • If the secondary latch is engaged and the cable end is visible, perform the following procedure: 3.1. Tighten the cable by rotating the hoist shaft clockwise until you hear 2 clicks or feel it skip twice. You cannot overtighten the cable. 3.2. Loosen the cable by rotating the hoist shaft counterclockwise 3 or 4 turns. 3.3. If the spare tire can be lowered, repeat steps 1 and 2 to see if the spare tire can be removed. 3.4. If the spare tire cannot be lowered, rotate the hoist shaft counterclockwise until approximately 15 cm (6 in) of cable is exposed. 3.5. Raise and support the vehicle. 3.6. Place a transmission jack, or equivalent, under the spare tire. 3.7. Position the center of the transmission jack under the secondary latch release button at the center of the spare tire. Arrange the arms of the transmission jack so they will support the tire after it has been released. 3.8. Raise the jack until the spare tire stops moving upward and is firmly held in place, releasing the secondary latch. 3.9. Lower the tire. If the spare tire is hanging by the cable, rotate the hoist shaft counterclockwise until the tire is low enough to remove.
  • Feb 28, 2010 | 2009 GMC Yukon XL

    1 Answer

    The cable for the spare tire on my 2006 1500 works fine (it's all the way down) but the retainer did not lower at all so I cannot pick up the spare tire. Can anyone help? Thanks


    1. Rotate the hoist shaft counterclockwise until approximately 15 cm (6 in) of cable (1) is exposed.
    2. While holding the latch pin (3), fully depress the latch button (2) and release the secondary latch from the hoist assembly. Some side-to-side and/or up-and-down movement may be necessary to disengage the latch mechanism.
    3. Continue rotating the hoist shaft counterclockwise in order to lower the hoist the rest of the way.
    4. If this does not release the secondary latch, the spare tire hoist will need to be replaced. See the following procedure.
    Important: If the spare tire hoist has been fully raised without a spare tire in place, the secondary latch mechanism may have become engaged. If this has occurred the hoist will not lower and the following steps will need to be followed:

    Nov 01, 2009 | 2005 Chevrolet Silverado

    1 Answer

    02 chevy trailblazer Tire Mount/Hoist


    The best place to go and get one is the Salvage Yard, it's will cost you $25,00 if you pull it off the scrap trailblazer. Or you can have them pull one out for you but will cost more, Good luck and hope this helps. 

    Jul 04, 2009 | Chevrolet TrailBlazer Cars & Trucks

    1 Answer

    Replacing Chevy Trailblazer Spare tire mount/hoist.


    Check out item 330335042615 on Ebay...
    it''s the whole jack, handle etc... 50 bucks!
    Tah dah!

    Jun 09, 2009 | 2002 Chevrolet TrailBlazer

    3 Answers

    Spare tire won't release.


    This is the worst GM engineering i have ever seen !!!! The secondary locking mech. rust itself in the locked position on will NOT allow the tire to lower. After lowering the tire down approx. 2-4" the saftey lock is still engaged. I was able to reach above the tire and remove the bolt holding the hoist in place. {15 mm wrench}. Keep a floor jack under the tire to support it and as not to fall on your head. After removing the bolt the hoist is hooked on the frame member and must be lifted off to remove. Once you get it on the garage floor it is possible to disengage the locking mech. with a few tools and a big hammer. Good luck This should be a Recall

    May 20, 2009 | 2005 Chevrolet Silverado

    5 Answers

    Hoist to lower spare tire does not work.


    Same thing happened to me on my 2002 trailblazer. The last few wraps of the cable was corroded to the point that it wouldn't unwind with the tool supplied. First thing to do is cut the crimped end of the cable off with a grinder or cut off wheel but don't forget to support the spare. This will get the spare out of your way then simply take out the 3 mounting bolts for the cable hoist. At this point you could buy a new cable hoist from the dealer and install it yourself or you might be able to do what I did. I managed to pull and remove about a foot of the rusted cable, slide the rectangular metal piece, that actually holds the spare at the center of the wheel, back on the cable and attach a 1/4" cable clamp to the end of the cable which of course must be in good condition. There should still be enough cable to re-attach your spare to it and hoist it back up. Don't forget to lube things up so it won't happen again. Good luck. (buying a new one sounds better, doesn't it?)
    mikethemedic in Hawley,Pa.

    Jan 23, 2009 | 2002 Chevrolet TrailBlazer

    Not finding what you are looking for?
    2001 Toyota Sienna Logo

    100 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts

    yadayada
    yadayada

    Level 3 Expert

    75051 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7726 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...