Question about Cars & Trucks

Open Question

I need the torque setting for a 1961 chevy truck c10 spindle nut troque setting

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 726 Answers

SOURCE: wheel nut torque settings

65 ft/lb? And tighten 1 3 5 2 4

Posted on Jul 15, 2008

  • 45 Answers

SOURCE: need torque setting for front hub nut on a mark 3 golf vr6

195 ft-lbs I verified this in the Volkswagen repair manual aka the vdubbers bible

Posted on Mar 24, 2009

Monster80
  • 460 Answers

SOURCE: Torque Setting for the Wheel Berring Nut

Is this a 4x4 or 2 wheel drive?If its 4x4 its 150flbs and 2 wheel drive its tightened by hand until slop or wobble is gone.

Posted on Mar 30, 2009

emissionwiz
  • 75822 Answers

SOURCE: spindle nut torque spec on a 2004 F-150

u DON'T torque this!! tighten the nut while spinng the rotor, then back off untiol it is free, then tighten it down until it seats tight, then turn another 1/8" tighter, that is it, any tighter u burn up the the wheel bearings

Posted on Feb 04, 2010

  • 2 Answers

SOURCE: have a 1981 chevy silverado c10 and the fuel gauge

your both idiots

Posted on Oct 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the axle nut torque specifications


Google Make, Model, year CV Axel nut torque. The spec you cite, is not right, that is the troque of the engine at that speed!

Mar 04, 2015 | Cars & Trucks

4 Answers

What size is the axel nut on a2006 chevy cobalt front


memory serves says 36mm.....not absolutely pos. though

Dec 14, 2014 | 2006 Chevrolet Cobalt

1 Answer

How to torque rocker arms on a chevy 3.1liter?


There is no specific order to tighten them down, turn the nuts to the stops and troque them to the specified nimber in the repaire manual. If you do not have a repair manual you can pick one up at your local autopart store for under $20

Jul 17, 2014 | 2000 Chevrolet Malibu

1 Answer

Need to know the torque setting for the rear weel bearing on my 2001 ford focus. it takes a 30mm socket.


The torque setting 49 ft. lbs.


Torque Specifications
Description Nm lb-ft lb-in Wheel nuts - steel/alloy wheels 128 94 - Wheel spindle retaining nuts 66 49 - Wheel cylinder retaining bolts 12 9 - Rear brake pipe to wheel cylinder union 8 - 71 Rear wheel speed sensor retaining bolt 9 - 80 e0001241.jpg
Item Part Number Description 1 - Tie bar and knuckle 2 - Backing plate 3 - Wheel spindle 4 - Sensor ring - anti-lock control 5 - Grease cap 6 - Wheel bearing retainer 7 - Drum

Apr 26, 2011 | Ford Focus Cars & Trucks

1 Answer

Rear wheel hub torque settings


spindle hub bolts 75-110 ft lbs.

rear spindle lock nut 130-173 ft lbs.

lug nuts 65-87 ft lbs.

Oct 08, 2010 | 2004 Mazda 6

1 Answer

Squeak at left rear wheel due too loose axle spindle nut. What is recommended torque setting for the spindle nut on 1990 corvette conv.


With an assistant depressing the brake pedal to prevent the wheel from turning, tighten the spindle nut to 164 ft. lbs. (223 Nm). The vehicle should not rest on the tires or move until the spindle nut is tightened.

Apr 23, 2010 | 1990 Chevrolet Corvette

1 Answer

I am looking for the factory torque settings for the front wheel bearings for a 2004 Chevy s10 pick up.


IF YOU HAVE 4WD YOU WILL HAVE TO REPLACE BEARINGS.NOT ADJUSTABLE. IF YOU HAVE A 2WD YOU WILL REMOVE COTTER PIN AND LOOSEN THE SPINDLE NUT.SPIN THE WHEEL FORWARD BY HAND THE TORQUE NUT TO 12 FT LBS TO SEAT BEARING.THEN BACK OFF NUT 1/4 TO 1/2 TURN TO UNTIL HOLE IN SPINDLE LINE UP WITH SLOT IN NUT.THEN INSTALL A NEW COTTER PIN.

Sep 11, 2009 | 2004 Chevrolet S-10

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...