Question about Ford Windstar

1 Answer

Locate the safety neutral switch on a 1997 ford taurus

I`m looking for the netural safety switch` have replaced starter but it doesn`t engage to flywheel

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The neutral safety switch is located on the sterring columm
locate the safety neutral switch on a 1997 ford ta - de2547ba-201d-4856-93b4-1a62cd9289a8.jpg

Posted on Feb 21, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: I have a 1964 Cadillac

its the solinoid or the saftey switch but chances are its the solinoid

Posted on Sep 29, 2008

alicantecoli
  • 22219 Answers

SOURCE: starter runs but won't engage flywheel

engine crank thrusts worn and crank moved back enough to not engage ,with a manual the clutch would push it forewards.or the flex plate on the back of the torque converter damaged and broke in teh centre where bolts to the crank

Posted on Dec 27, 2008

  • 1 Answer

SOURCE: 1997 Ford Taurus flasher location/replacement

images from a 97 Ford Taurus, GL body type. Shows location of flasher and a simple removal tecnique I discovered. The alternative was insane contortion.
f2b5880.jpg
f31c9b2.jpg

Posted on Jun 03, 2009

emissionwiz
  • 76649 Answers

SOURCE: Neutral Safety Switch Location

on the transmission where the shift cable attaches.

Posted on Jun 15, 2009

ZJLimited
  • 17970 Answers

SOURCE: Looking for the neutral safety switch

Neutral Safety/Back-up Light Switch

This is a combination switch which controls both Neutral Safety and Back-up lamp circuits.

C6 Transmission


8290dff.jpg

C6 neutral start switch

  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle on jackstands.
  3. Remove the downshift linkage rod return spring at the low-reverse servo cover.
  4. Coat the outer lever attaching nut with penetrating oil. Remove the nut and lever.
  5. Remove the 2 switch attaching bolts, disconnect the wiring at the connectors and remove the switch.
  6. Installation is the reverse of removal. Adjust the switch and tighten the bolts to 55-75 inch lbs. (6.2-8.5 Nm).
  7. Remove the jackstands and lower the vehicle.
  8. Connect the negative battery cable.
AOD Transmission

e7f4231.jpg

Removing the AOD neutral start switch
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle on jackstands.
  3. Disconnect the wiring from the switch.
  4. Using a deep socket, unscrew the switch.
  5. Installation is the reverse of removal. Tighten the switch to 10 ft. lbs. (14 Nm).
  6. Remove the jackstands and lower the vehicle.
  7. Connect the negative battery cable.
4R70W Transmission

2f68dfc.jpg


Removing the Manual Lever Position (MLP) sensor

As of 1994, the neutral safety switch is referred to as a Manual Lever Position Sensor (MLP).
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle on jackstands.
  3. Disengage the harness connector from the MLP sensor.
  4. Remove the 2 sensor attaching bolts and remove the sensor.
To install:
  1. Install the MLP sensor and install retaining bolts. Do not tighten, the sensor requires adjustment.
  2. Adjust the MLP sensor then tighten attaching screws to 80-100 inch lbs. (9-11 Nm).
  3. Remove the jackstands and lower the vehicle.
  4. Connect the negative battery cable.


ADJUSTMENT

C6 Transmission
  1. Hold the steering column transmission selector lever against the Neutral stop.
  2. Move the sliding block assembly on the neutral switch to the Neutral position and insert a 0.091 in. (2.3mm) gauge pin in the alignment hole on the terminal side of the switch.
  3. Move the switch assembly housing so that the sliding block contacts the actuating pin lever. Secure the switch to the outer tube of the steering column and remove the gauge pin.
  4. Check the operation of the switch. The engine should only start in Neutral and Park .

4R70W Transmission


4cc4151.jpg


Adjusting the MLP sensor

Park is the last detent when the manual control lever is full forward. Return 2 detents toward the output shaft for Neutral.
  1. Position the manual control lever in Neutral .
  2. Insert Gear Position Sensor Adjuster tool T93P-700 10-A or equivalent, into the slots.
  3. Align all 3 slots on the MLP sensor with 3 tabs on the tool.
  4. Tighten the attaching screws to 80-100 inch lbs. (9-11 Nm).

I hope help you. Good luck (rated this help).

Posted on Sep 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 ford focus no start. neutral safety switch location?


Do you know how your starting system works ? Do you know about the starter relay ? All power comes to an through the starter relay . The park neutral safety switch is on the transmission. VEHICLE RELAYS Testing from the relay base If you have a anti-theft system problem the engine computer - PCM will not let the starter engage . Go to www.bbbind.com for a free wiring diagram of the starter circuit on your vehicle .

Oct 12, 2015 | 2008 Ford Focus

2 Answers

Replaced starter and solenoid and cables all I get is a clicking sound. what is problem


If it is a load click(more like bang), like the starter is engaging the flywheel, the engine could be locked up. Use a socket or wrench on the crankshaft bolt to see for sure. If it is a soft click, it is the relay engaging. Replace the neutral safety/range selector switch on the transmission. under the shifter cable.

Jul 12, 2015 | 2000 Ford Taurus

1 Answer

How do I locate my neutral saftey switch on my 1997 Toyota Tercel?


Normally, only automatic transmission cars are equipped with a neutral safety switch. There is a switch on the clutch pedal up under the dash that will not allow the starter to engage unless the clutch is depressed.

Nov 21, 2013 | Cars & Trucks

1 Answer

Where is the solenoid on this car?


There are several options.
You may have a solenoid mounted on the starter, or on the fender near the battery. You may also have a starter relay in the fuse box.
If the starter is not getting power, you may also need to check the neutral safety switch.

Jul 03, 2013 | 1997 Ford Taurus

1 Answer

Where is the netural safty switch 1992 crown victoria


the neutral safety switch is on the metric tranny with wires coming out of it up to the engine

Dec 04, 2012 | 1992 Ford Crown Victoria

2 Answers

Bronco wont start 88 ford bronco just replaced tranny and now won't start. i've hooked everything back up but one of the wires to the transfer case bc i broke the plug in. any ideas why it wont start...


The neutral safety switch is located on the side of the transmission and it is usually attached behind the shifter linkage and it is secured with two small bolts that can be loosened up to allow for adjustment of the neutral safety switch.

To adjust the neutral safety switch place the transmission into neutral, (block the tires) there is a notch or and indent marker on the housing of the neutral safety switch that should be lined up with a line on the face of the collar that is around the shifter detent shaft, and if they are not in alignment then loosen the two bolts that secure the neutral safety switch and then turn the neutral safety switch until they are aligned and then tighten the securing bolts to the neutral safety switch, and then test the starter. If the starter fails to engage then either the neutral safety switch is faulty, the neutral safety switch has been by-passed all this time and the by-pass (I will usually find things like a paper clip shoved into the vehicles wire connector with electrical tape around it) has fallen out of the wire connector from the vehicle wiring harness, or the battery just went dead. if you have the neutral safety switch from the old transmission still available try using it to test the neutral safety circuit. I have provided you with an image to help assist you adjust the neutral safety switch.


0b4222e.jpg

Jun 20, 2010 | 1988 Ford Bronco

2 Answers

How to trouble shoot starting system 98 ford crown victoria


Also check to see if there is power in the start wire form the ignition switch, the wire is a white wire with pink stripe, most likely not a common problem, but still something that could go wrong. this wire will feed the starter relay under the hood...

Sep 21, 2009 | 1997 Ford Crown Victoria

2 Answers

Where is the neutral safety switch location/located


On top of the transmission, right under the shift linkage. Look down under the brake master cylinder.

Mar 13, 2009 | 1997 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

403 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...