Question about Honda Pilot
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2001 Tarus clunking sound
very common problem is the sway bay end links that attach to the strut from the sway bar. They sound like a light chuckling knock over bumps. The bushings that hold the subframe up wear or the bolts loosed due to the bushings wearing. usually the rear ones The bushings are 2 piece ,upper and lower Tighten with 18mm socket
Posted on Feb 18, 2009
the tires make steady noise , check the wheel bearing as noises get high and low at the same speed , and i also would check for diff if it's 4wd.
Posted on Jul 25, 2009
SOURCE: 2005 honda pilot will not start
I had a similar issue, but I think it's because I left the tailgate door open slightly and the built-in light killed my battery. I jumped my battery, but I wasn't able to start my car again and this time the door was closed properly. I was told by Honda that the batteries only last for about 2-3 years. I have since replaced the battery and no more issues.
Posted on Jul 27, 2009
SOURCE: clunking going over bumps
shocks my be going bad push up and down hard on top of the car over each front wheel and let go..it should not bounce up and down more than once. if it does shocks are bad.
Posted on Apr 08, 2010
Tips for a great answer:
Jan 01, 2016 | 2005 Honda Pilot
Jul 02, 2012 | 2006 Honda Pilot EX
Feb 07, 2011 | 2004 Honda Pilot
May 11, 2010 | 1992 Ford F150 SuperCab
May 10, 2010 | 2004 Mitsubishi Endeavor
Oct 06, 2009 | 2005 Cadillac Deville
Apr 02, 2009 | 2005 Chevrolet Malibu
Feb 17, 2009 | 2000 Ford Taurus
Nov 23, 2008 | 1993 Dodge Caravan
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: