Question about 2001 Ford Explorer Sport Trac

Open Question

How do i get the license plate light apart to replace a bad bulb on my 1992 Buick roadmaster estate wagon

I removed the screws that hold the lens in place but it does not come out, hangs up and does not fit through the opening.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: How do I replace brake light bulHbs?

There are two more on the inner wall of your tailgate

Posted on Aug 12, 2008

Ad
michigan man
  • 3533 Answers

SOURCE: how to remove the rear light on my Freestar license plate

in most cases you have to open the rear tailgate remove the panel and then you have access to everything in the door

Posted on Jan 04, 2009

c17hydro
  • 2984 Answers

SOURCE: how to change the license plate light on 2001 ford focus zx3

Take a thin blade screw driver and gently pry between the rubber seal and the metal and pop the light out, replaced the bulb and pop the light back in. works fine.

Posted on Mar 22, 2009

  • 20 Answers

SOURCE: Replace license plate bulbs on 2003 ford focus

if you buy some of those "on tv only" lights that are bubble shaped and plastic, you can duct tape those onto your license plate area and click them on or off when needed.

Posted on Apr 25, 2009

  • 1 Answer

SOURCE: Fitting brake light - fiesta zetec

There is also a push in socket at the top of the light and a clip at the bottom. When the screws are all undone insert a flat screw driver under the light fitting about 4 inches from the top (remember to use a cloth under the edge of the screwdriver to avoid marking the paintwork) you should be able to push it out now.

Posted on May 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace license plate bulb in trunk lid 2006 buick century


If you can not get to bulb, Look at the light lens on trunk license plate. There may be screws on the lens to undue to get to bulbs. Good-Day!

Sep 01, 2014 | Cars & Trucks

2 Answers

Change the license plate lights in my 2002 buick rendezvous cx


On most GM cars, SUV's, and light duty trucks, the license plate light bulbs are held in place by 2 screws...located on each side of the plastic lens...remove these 2 screws then wiggle the entire assembly out so you can view and replace the bulbs...Again most GM cars have 2 bulbs also...Hope this helps.

Sep 06, 2013 | 2002 Buick Rendezvous

1 Answer

Replace license plate blub in 2002 buick lasabre


your going to remove the entire trunk lid assembly from the vehicle. If you open the trunk and look from the inside you should either see black plastic wing nuts or 10mm nuts holding the assembly to the trunk. There will be approximately 10 of them that will need to be removed. Once they are removed the lens assembly will pop away from the trunk lid. The license bulbs can then be replaced. I usually replace all six taillight/license bulbs whenever I have one of these apart. Its the same bulb for all six lights.

Oct 02, 2011 | Cars & Trucks

1 Answer

I HAVE A 1992 BUICK ROADMASTER. I NEED TO KNOW WHERE THE NUMBER 1 TERMINAL IS LOCATED ON THE DISTRIBUTOR.


1992 Buick Roadmaster Estate Wagon
5.0 liter V-892717863.gif This should work. #1 is bottom right on distributer

Mar 20, 2011 | Buick Roadmaster Cars & Trucks

1 Answer

Rear turn signal b ulb burned out - How to replace


Rear Turn Signal, Brake and Parking Lights
  1. Remove the tail light assembly screws, then the assembly.
  2. Disconnect the twist lock socket from the lens housing. NOTE: To remove the bulb, turn the twist lock socket (at the rear of the housing) counterclockwise 1?4 turn, then remove the socket with the bulb; replace the bulb if defective. Fig. 7: Remove the tail light assembly screws, then the assembly - wagon shown 86816223.jpg Fig. 8: Twist the socket counterclockwise to remove from the housing 86816225.jpg Fig. 9: This type of bulb simply can be pulled out of the socket for replacement 86816226.jpg To install:
  3. Attach the socket assemblies to the back of the lamp unit.
  4. Install the lamp assembly to the vehicle with the mounting screws.
License Plate Light
  1. Remove the lens screws.
  2. Once the lens is removed you, can access the bulb and replace if needed. To install:
  3. Install the new bulb, then attach the lens to the body of the vehicle.
Center High Mount Stop Lamp
  1. Remove the screws securing the lamp cover.
  2. Remove the mounting nuts, then unplug the electrical harness to the lamp assembly.
  3. The lamp now should come out. To install:
  4. Position the lamp assembly to the vehicle, then attach the electrical harness to the lamp.
  5. Install the mounting nut, tighten to 62 inch lbs. (7 Nm).
  6. Attach the lamp cover. Fig. 10: Exploded view of the center high mount stop lamp assembly - wagon shown 86816230.gif
    Fig. 11: Light bulb application chart for all models with non-European headlamps 86816237.gif
    Fig. 12: Light bulb application chart for Buicks with European headlamps 86816235.gif
    Fig. 13: Light bulb application chart for Oldsmobiles with European headlamps 86816236.gif
    prev.gif next.gif

Dec 19, 2010 | 1994 Buick Century

1 Answer

My tail light is out over the license plate on my 1993 buick park avenue. How do I get to it to change it?


There will be 6-10 retainers (sometimes they are 10mm nuts and sometimes they are plastic speed nuts) holding the whole lens assembly to the trunk lid. Once those are removed you will be able to remove the lens assembly and access the bulb. There are six bulbs all together, two for the license place and four tail lights (not including the reverse lights) and they are part number 194. I usually recommend replacing all six while you have the lens removed from the trunk.

Nov 07, 2010 | 1993 Buick Park Avenue

1 Answer

How to replace license plate light on a 2002 buick lesabre


Hi. Remove the retaining screws from the license plate light assembly with a Phillips screwdriver. There are two screws on each side of the lens assembly.

Pull the light assembly cover down out of the way to gain access to the bulbs. Twist the bulb socket counterclockwise to remove it from the assembly and pull it straight out. Pull the bulb out of the socket.

Push the new bulb straight into the socket. Replace the bulb and socket inside the light assembly and turn it clockwise to secure it.

Replace the assembly cover and secure it with the retaining screws. Tighten the screws with a Phillips screwdriver. Turn on the lights to test your new bulbs.
Take care

Aug 04, 2010 | 2002 Buick LeSabre

2 Answers

How can I replace the license plate lights?


mcdevito75 here, Just above the license plate in the bumper you should see the light lens, simply remove the 2 screws and change the bulb/bulbs

Jun 18, 2010 | 2002 Buick LeSabre

2 Answers

Location fuse boxes 1991 buick roadmaster estate wagon


one under the hood another drivers side kick panel.  Also check the relays

Apr 01, 2009 | 1991 Buick Roadmaster

1 Answer

License plate lights in the trunk lid.


The license plate bulb is replaced by removing the two scews that hold the lens in place and pulling the lamp housing out of the trim plate the removing the socket.

Jul 15, 2008 | 1998 Buick LeSabre

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...