Question about 2006 BMW 750Li
Check engine light code in 2006 bmw 750li
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You can't use a tool to pull codes from an '87 BMW 325(e). You have the 2.7 liter and your DME, or computer is a Motronic. If you had a 325i, then a tool could read the codes because the computer was upgraded that year to a Motronic 1.1 system with a round plug in under the screw cap on the driver's side under the hood. The only tool you can buy is the one for resetting the service interval light and resetting the oil change light. To answer your question about going about finding your driveability problem would be to get a BMW Bentley Manual. This manual shows you how to use a standard voltmeter to check everything from your computer plug in. Your computer is located above the glovebox.
Posted on Jun 05, 2009
Code PO340 "Camshaft Position Sensor Circuit Malfunction". Now that does not mean that if you simply replace the sensor your problem will be solved. It can be simply loose, cut, or corroded wiring. It can also be something entirely different. This is where diagnostic skills come in.
Posted on May 01, 2010
IF YOU ARE GETTING A THROTTLE PEDAL POSITION SENSOR FAULT CODE.THE THROTTLE POSITION SENSOR IS THE WHOLE THROTTLE BODY UNIT IS THE THROTTLE POSITION SENSOR.THE SENSOR NOT IN GAS PEDAL LIKE VOLKSWAGON. VOLKSWAGON HAS THE ACCELERATOR PEDAL POSITION SENSOR.
Posted on May 16, 2010
SOURCE: how do i check the
There is a allen fill plug on the side of the tran towards the back.the trans temp should be around 50 deg c,with the engine running remove the plug,the fluid should just trickle out of the fill hole.
Posted on Feb 10, 2011
SOURCE: Reset the service light after
BMW insp. reset
- Iginition OFF (POS 0)
- Press and Hold the trip odometer button while turning key to position 1 (ACCESSORY)
- Keep the button depressed (about 5 secs.) until you see "Oil Service" or "Inspection" with "Reset" or "Re" in the display
- *Note: On vehicles with "High" cluster, you will also see the amount of fuel (in litres) remaining until next service
- Press the button again and hold for approx. 5 secs. until "Reset" or "Re" flashes
- While the display is flashing, briefly press the button again to reset the Service Interval. After the display has shown the new interval you should see "END SIA" for about 2 secs.
Note that if the "Reset" or "Re" does not flash, then you have not met the minimum consumption level and cannot reset.
Posted on May 31, 2011
Tips for a great answer:
Aug 25, 2016 | 2006 BMW 750Li
Oct 20, 2014 | 2006 BMW 750Li
Oct 07, 2014 | 2008 BMW 750 LI LUXURY
Jul 20, 2014 | 2006 BMW 750Li
Jul 17, 2014 | 2006 BMW 750 Li
Mar 25, 2013 | 2007 BMW 750Li Sedan
Jan 05, 2013 | 2006 BMW 750Li
Sep 06, 2011 | 2007 BMW 750Li Sedan
Feb 09, 2011 | 2006 BMW 750Li
Oct 30, 2010 | 2006 BMW 750Li
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: