Question about Ford Fiesta
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: my car wont lock
If you can remove the door panel, check to make sure none of the lock linkage is bent. If it is bent try bending it back. If its not bent pick up a can of white grease and spray all the moving parts inside your door that connect to the lock mechanism.
Posted on Aug 07, 2008
SOURCE: vw polo gti boot lock
try locking the car then disconnect the boot lock. then unlock the car and reconnect the boot lock,it sounds as though its out of sinc with the rest
Posted on Oct 12, 2008
simple your mechanism on the inside of the boot(catch mech) is spring loaded.just spray copious amounts of wd40 deep inside. if that dosent work then your catch/keep is twisted.
Posted on Nov 10, 2008
SOURCE: Auto door locking on Ford Mondeo
It sounds like it has been deactivated so we are going to reactivate the auto lock.
The numbers I will be saying will have to do with getting this to work so:
you will need to put the key in to the ignition switch.
1= is back to listen to the radio
2= is to get key out
3= is just before you start
4= is for starting your car
When we do this 1 and 4 will not be used
Do this and we will hope that it works like it should:
1: Turn the ignition with you key up to on( don't start)
2: Press the power door lock control 3 times
3: now turn the key back once (to off position)
4: Press the power door unlock control 3 times
5: ok turn the ignition back up 1 time. (The horn should chirp)
6: Then press the unlock control, then press the lock control, again (horn will chirp 1's) If auto lock
7: Turn the ignition back 1's, Then the horn should chirp once to confirm the procedure was completed.
Posted on Nov 29, 2008
what is the spec? best to ring ford and they will tell you. just give them the registration/ chassis id. you can find the chassis id on the bottom of the front windowscreen on the passenger side, or a little flap on the right side of the drivers door.
hope this helps.
Posted on Mar 18, 2009
Tips for a great answer:
Jan 27, 2017 | 2013 Ford Fusion
Jan 23, 2017 | Ford Fiesta Cars & Trucks
Apr 10, 2016 | Ford Cars & Trucks
Jan 13, 2016 | Cars & Trucks
Jun 30, 2014 | Ford Fiesta Cars & Trucks
Jun 27, 2014 | 2013 Volkswagen Passat
Jan 11, 2014 | 2011 Ford Fiesta
Aug 28, 2012 | 2008 Ford Fiesta 1.4
Feb 26, 2012 | 2010 Ford Fiesta 1.6
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: