Question about Honda CR-V

Open Question

How to switch off the 30 mph warning light in new CRV

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does warning light mean for Honda crv?


What does the light say? is there a symbol in the light displayed?

Aug 09, 2017 | Honda Cars & Trucks

1 Answer

2003 CRV: light is out on dash cruise control on-off switch, how to fix?


try looking at your brake light switch. My CRV did the same thing, and a new brake light switch later everything works!

Apr 16, 2011 | 2003 Honda CR-V

4 Answers

Tire warning light won't go off - Tires are correct pressure


it needs to be reset, here is the procedure>>>http://library.motoralldata.com/techRef/WebHelp/Tire_Pressure_Monitor_Reset_Procedures/Toyota/2005-2006_Solara.htm

Aug 10, 2010 | 2006 Toyota Solara

1 Answer

How do you reset low tire light


1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 20, 2009 | 2005 Chrysler PT Cruiser

1 Answer

Warning light does not go on when door is open and lights left on 2006 Honda CRV Thanks


Is the overhead interior light switch turned off with the effect that when the doors are opened the interior light doesn't come on. Alter the switch setting and open the door: if the interior light comes on then you should see the warning light come on if the vehicle lights are left on. Failing that it's likely to be a faulty doorswitch or the cable and connector to the doorswitch has become detached. Try unscrewing the doorswitch and withdrawing it from the vehicle body and check that the wire is still connected. Check using a multimeter that the switch operates electrically when open and closed. Replace or repair as appropriate.

Jun 11, 2009 | 2006 Honda CR-V

1 Answer

Honda crv 2000 computer reset


Ok,
1. ensure ignition off
2 . bridge the 2 pin connector, Put a piece of wire across both terminals
3.switch ignition on
4. SRS lamp should illuminate for 6 seconds
5.disconnect the bridge wire within 4 seconds of the warning lamp extinguishing
6.SRS lamp should illuminate 2 times, Codes erased
7.switch ignition off
8 Wait 10 seconds. switch ignition on and check SRS warning lamp operation.
hope this helps

Feb 18, 2009 | 2006 Honda CR-V

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...