Question about 2003 Ford ZX2
When I turn the knob over I hear a click in the dash but no heat blows out, Im thinking its a fuse but Im not completely sure and if it is a fuse where is the fuse located on the car?
Could be that the arm that controls that function has broke or popped off.
Posted on Feb 10, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: ford focus, 2000 zx3 code p0455
your engine code means "big leak" in the evap control system, this system has alot of pieces, but you are looking for a vacuum leak most probably, look at your vacuum hoses, and refer to the vacuum diagram stuck under your hood for routing, see if you have a bad hose, or disconnected hose some where. these are small vacuum hoses that attach to the purge valve, air filter housing, and charcoal cannister. let me know what you find.
Posted on Apr 13, 2009
Testimonial: "Found the leak on the purge control valve. The hard plastic vacum line had holes worn in it from vibration. Thanks"
I wonder if your battery is really in an excellent shape. The way you described seem to be non sufficient voltage for the starter solenoid to engage completely. Make a quick observaton by leaving the headlight on while cranking the engine. If no significant drop on the headlight brightness. Then your battery is assumed to be good. (a cold crank voltage shouldn't below 10V) Then the remained items to work with is either the solenoid or the starter or both. I believe the solenoid is piggy pack on the starter. Most autopart stores would test it for free of charge.
Posted on Jun 04, 2009
Hello mawbea: My name is Roger I will answer your question. You did not say which engine is in your car. So if you have a 2.0 SOHC engine. If the belt broke you should be Ok. If you have the 2.0 DOHC engine. The likely hood of bending the valves are just about a guarantee. How ever with any engine using a timing belt it is possible to bend a valve.Should you need more help please just ask.
Please rate the quality of your answer as this way we know you received helpful information.Thank You for using Fix Ya, Roger
Posted on Jul 08, 2009
there is a recall on them i had the same issue it is caused by the wires being crushed when the trunk colses(im an ex ford mechanic, and ex owner of a focus)
Posted on Dec 16, 2009
Tips for a great answer:
Jan 21, 2017 | Ford Cars & Trucks
Aug 17, 2013 | 2002 Ford SVT Focus
Jun 04, 2013 | 2000 Ford Focus
Sep 27, 2011 | 2000 Ford Focus
Nov 25, 2010 | 2001 Ford Focus
May 22, 2010 | 2001 Ford Focus
Dec 16, 2009 | 1999 Ford Explorer
Jul 20, 2009 | 2000 Ford Focus
May 08, 2009 | 2001 Ford Focus
Jul 08, 2014 | 2003 Ford ZX2
75 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: