Question about 2001 Mazda MPV

Open Question

Engine hiccups/jerkiness for mazda mpv 2001

Just started and only occurs on highway speed of 55 mph and more but not a lot. jerks a lot first time i notice it then not so much the second time it was driven highway.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 840 Answers

SOURCE: power windows on 2001 mazda mpv won't go up?

if you do not here the motor then its the regulator or motor that needs to be replaced/ cif you hear the motor check the control switch on the trim panle coould be just a five dollar part to replace/ Please rate my response thank you very much

Posted on Jan 31, 2009

  • 90 Answers

SOURCE: shaking mazda mpv 2003 in idle and loud radiator fan

Hello there, As far as the check engine light I would think since you mentioned it shacking that your light will probably be on for a misfire, Meaning most likely you have a spark plug wire going bad. I would stop by somewhere such as Autozone for a free check to tell you why your light is on just to double check.

Your fan issue could be several different things such as the fan motor going bad or the blades could be rubbing something, that one is a little tricky without hearing it.

Good Luck and I hope this does help you some. Allen

Posted on Oct 04, 2009

  • 1986 Answers

SOURCE: I have a Mazda 2001 MPV, just had service for o2

blinking light means engine is misfiring. continuing to drive will severely damage the engine. The O2 should not be related to your engine misfiring

Posted on Nov 13, 2009

  • 1 Answer

SOURCE: owner manual mazda MPV 2001

www.jpnz.co.nz has translated owner manuals for sale .
about $50 nz i think it will cost you

Posted on Jan 21, 2010

  • 1 Answer

SOURCE: I need to locate the engine number in my mazda mpv

It's located behind the radiator and is only visible from the inspection pit. There are two numbers, the top one is the engine no.

Posted on Feb 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have 97 gmc suburban. Has a jerk to it when I'm crusein on highway and from time to time seems as if im hitting a bunch of little bumps an it boggs down. I let off gas it stops what could this b?


Could be the fuel filter. Watch the speed it happens. IE.. Ok at 50 MPH, hit 60 MPH it starts jerking. Clogged filers will give the pressure need, just not the volume of fuel need at higher speeds.

Jan 12, 2017 | 1997 GMC Suburban

2 Answers

I have a 2002 Mazda MPV. When do I turn on/ off overdrive to my transmission


By default, your automatic transmission has a torque converter that is the main focus to your car\truck changing gears. I had one break on me in a Nissan Sentra and was glad I was close to where I was going because I would have otherwise been stranded.

If you live in a mountainous area and do a lot of traveling going up and down hills, your best bet, as long as you are above 58 mph(like going thru Denver on Interstate 70 and going west thru the Rockies, then it is okay to leave the overdrive on. I would, however, recommend that going up an incline of more than 30* then you may want to turn it off until you have reached a sustainable speed. If you are towing more than 800 lbs on a trailer on an incline of more than 20* then you would want to turn the overdrive off as the torque converter putting your vehicle into overdrive with a heavy load can cause the converter to snap within the transmission and you would be dead in the water.

If you live in a more plain-like state then the only time you really NEED to turn off the overdrive is if you are hauling a large amount of cargo any real distance or rarely get over 4300 rpm due to such short traveling distances. Overdrive function is primarily used to cut down on the amount of fuel needed in order to take long journey on Interstate or State highways that allow for speeds faster than 55 mph.
Hope this helps.

Apr 24, 2015 | 2002 Mazda MPV

1 Answer

Radio not working


You did not state whether you have the base radio or the premium radio but you need to check the 15A CIGAR FUSE and the 10A ROOM FUSE in what Mazda calls the joint box. If you have the premium radio, you need to check the 10A AUDIO FUSE also.

Nov 25, 2013 | 2001 Mazda MPV

1 Answer

The problem: intermittently it hiccups, jerks and


check the spark plug wires. one or more may be bad . if you want to check it yourself get a spray bottle with water in it and spray the wires if you see sparks they are bad

Sep 06, 2013 | 1999 Mazda Protege

1 Answer

I am experienceing what seems to be an engine misfire which feels like a "bump", or a short loss of power. It occurs at a road speed between 45-55 mph. It is intermittent and does not happen during an


I would give it a tune up, plugs wires. Mostly under a load will it miss eratic. I would start there. Im sure youll find thats what the problem is. As far as trans, do see that happening.

Jan 24, 2013 | 2005 Ford F-150

1 Answer

I recently purchased a 2001 Mazda Millenia. It was a little jerky test driving it, but it was winter with snow and ice. Now it's spring, and it's still jerky. I took it out on the hwy doing about 70 mph...


Do you notice does the problem seem to worsen in rain or humid weather? Try checking the MAF sensor it may just need to cleaned it can cause problems like this. Be sure to use MAF cleaner nothing else. The sensor may also be bad but try cleaning it first, its cheap and only takes about ten minutes.

Apr 07, 2011 | 2001 Mazda Millenia

1 Answer

I've been having problems with my Hyundai Sonata 1999 with a 2.4L 4 cyl. Running rough when started. Have to push gas pedal to start or stalls after running for a few seconds.. Sluggish/jerky starts when...


could be a few things the start up could be the idle air control sensor (my first thought), the coolant temp sensor for the computer might be a secondary thought for the engine being cold if the computer thinks its warm. that would be the first 2 places i would start without a check engine light or code to reference

Jul 31, 2010 | Hyundai Sonata Cars & Trucks

2 Answers

When driving at the speed of 40-50 miles my car jerks?


your car has a computer controlled fuel system.
when you take your foot off the gas above 1800 revs, no fuel goes through the injectors(saves fuel)so,when you are criusing at about 45mph,top gear,it is trying to work out fuel or no fuel,hence the jerkiness(it will do the same with cruise on) sorry to say this is a feature of all new cars............

Jul 02, 2010 | 2005 Mazda MPV

1 Answer

Engine light blinking in my Mazda MPV


A BLINKING ENGINE LIGHT INDICATES AN ENGINE CYLINDER IS MIS-FIRING. HAVE THE TROUBLE CODES TESTED TO DETERMINE WHICH ONE. DO NOT DRIVE THIS WAY AT HIGH SPEEDS AS IT MAY OVERHEAT THE EXHAUST SYSTEM AND CREATE A FIRE HAZARD.

May 01, 2009 | 2001 Mazda MPV

Not finding what you are looking for?
2001 Mazda MPV Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...