Question about 1993 Chevrolet Lumina

Open Question

1993 chevy lumina power steering pump removal

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chiquititas
  • 1010 Answers

SOURCE: 1987 Chevy G20 van replace power steering pump

Does your van have the serpentine belt? If so maybe I can help, I replaced the Power steering pump on my 90 G20 a couple of weeks ago. The trick is that you need to pull the pump pulley which is pressed on to access the mounting bolts which attach the pump to the engine. Harbor Freight tools sells a great tool designed for this job for $20.00. Once you have the correct tools, remove the serpentine drive belt. You may also need to remove the fan shroud. the pump shaft looks like it has an allen socket in the center, but this is for use in the manufacturing process, and will not come out. Place the puller tool on the pulley following tthe instruction that come with the tool, and remove the pulley. loosen, but do not remove the nut on the high pressure hose connection. use a pair of **** pliers to cut and remove the crimp clamp on the low pressure hose. If your pump has the remote reservour loosen the clamp on the reservour hose also. Remove the three mounting bolts, place a large pan under the pump to catch drips, and remove the prevously loosened hoses. there will be fluid leaking all over and the pump should come free, There are two types of replacement pump sold. With and without reservour. This reservour is a metal cover that fits over the back of the pump, and should not be confused with the reomte revervour found on some newer models which is next to the battery. This reservour is held in place be two throught the pump bolts which are removed at the back of the pump. If your new pump has a reservour you will probably still need to remove these bolts and put them in the replacement pump as most are shiped without these bolts. If you replacement pump comes without a reservour pull the bolts, the reservour should pull off of the old pump and slide onto the new one. check the o rings and replace the through the pump bolts. Installation is the reverse of removal execpt that 1/2" hose clamps replace the crimp clamps on the low pressure hose, and the puller tool is set up differently to replace the pulley. Finally if you don't flush contaminants out of the system your repair will last maybe a week. www.cardone.com has a great article about power steering flushing, read it before you start Good luck.

Posted on May 15, 2008

  • 341 Answers

SOURCE: Power Steering Pump removal

you havr the whole bracket with pump .next you will need PS pulley removal tool take out 3 bolts same tool needed to replace pulley

Posted on Oct 20, 2008

davesmith_37
  • 94 Answers

SOURCE: removing power steering pump

To replace the power steering pump, proceed as follows:

  1. Disconnect the power steering return hose from the remote reservoir or pump. Allow the fluid to drain from this hose into a drain pan. Discard the used fluid.
  2. Loosen the bracket or belt tension adjusting bolt, and the pump mounting bolt.
  3. Loosen the belt tension until the belt can be removed. On some cars, it is necessary to lift the vehicle on a hoist and gain access to the power steering pump from underneath the vehicle.
  4. Remove the hoses from the pump, and cap the pump fittings and hoses.
  5. Remove the belt tension adjusting bolt and the mounting bolt, and remove the pump.
  6. Check the pump mounting bolts and bolt holes for wear. Worn bolts must be replaced. If the bolt mounting holes in the pump are worn, pump replacement is necessary.
  7. Reverse steps 1 through 5 to install the power steering pump. Tighten the belt as described previously, and tighten the pump mounting and bracket bolts to the manufacturer's specifications. If o-rings are used on the pressure hose, replace the o-rings. Be sure the hoses are not contacting the exhaust manifold, catalytic converter, or exhaust pipe during or after pump replacement.
  8. Fill the pump reservoir with the manufacturer's recommended power steering fluid, and bleed air from the power steering system as described earlier.

Posted on Feb 27, 2009

  • 2 Answers

SOURCE: How to replace high pressure hose on steering,

Found a diagram online myself..

Posted on Nov 09, 2009

ftw1952
  • 10319 Answers

SOURCE: how to remove a starter on 1993 chevy lumina?

Support the car very securely first of all

Remove the negative cable from the battery

Remove the wires from the starter

Remove the two bolts from the starter going upward to the engine block

Wiggle the starter out

Reverse this proceedure to reinstall

Posted on May 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace power steering cable 1992 chevy lumina


You don't have a cable. Are you talking about belt? If serpentine belt, there is a tensioner, you turn tensioner to remove tension on belt to remove.
You probably have power steering pump, power steering fluid lines, rack and pinion, steering linkages.
At the moment, I'm not sure your talking about?
26351006-3f0xj0ye3550btr1vosblosm-2-0.jpg

Nov 11, 2016 | Cars & Trucks

1 Answer

3.1 1993 chevy lumina cam sensor position? And how to take out


  • SERVICE AND REPAIR

Camshaft Sensor Follow this URL for picture:_
http://alldatapro.com/alldata/PRO~V416324719~C30660~R0~OB0~P3R0H~N/0/41746052/42417623/42417638/42422763/34853741/34857029/34857030/101366976/14461280/42437587/41882479

REMOVE OR DISCONNECT
  • Negative battery.
  • Serpentine drive belt and secondary air injection drive belt.
  • Power steering pump.
  • Electrical connector.
  • Bolt (1). Refer to Figure.
  • Camshaft sensor.
INSTALL OR CONNECT
  • Camshaft sensor.
  • Bolt (1) torque to 10 Nm (8 ft lb).
  • Electrical connector.
  • Power steering pump.
  • Serpentine drive belt and secondary air injection drive be!t.
  • Negative battery cable.

May 04, 2015 | 1993 Chevrolet Lumina

1 Answer

How can I tell if my 1997 chevy lumina's power steering pump is bad


yes if the aux belt is disconnected the pulley should turn free with slight resistance, sounds like a pump fault.

Feb 13, 2013 | 1997 Chevrolet Lumina

1 Answer

How do i replace an ignition switch on a 1993 chevy lumina with the key broken off in the switch in the on position


you have to remove steering wheel then turnsignal switch to access retainer screw for lock cylinder. remove screw and cylinder will pull out.

May 10, 2010 | 1993 Chevrolet Lumina

2 Answers

The pricing of a motor and transmission for a 1993 chevy lumina euro


a good starting place,try rock auto.com, there you can get an idea of pricing.just put in your info. for the car and then you'll see there pricing.

Apr 05, 2010 | 1993 Chevrolet Lumina

1 Answer

Need to install a new power steering pump on my 1992 lumina


Are you wanting to know how to do it? If so your best bet would to purchase a Haynes manual for your car from advance auto or autozone, pep boys sells them as well. It will take you thru a step by step process.

Feb 19, 2010 | 1992 Chevrolet Lumina

1 Answer

Steering column rocks.


No,the steering wheel has to come off,and the bearing is loose,to tighten the teering back up,it has to be dissasembled.

Feb 09, 2010 | 1993 Chevrolet Lumina

1 Answer

How do I remove a starter from a 1993 Chevy Lumina Z34


How do I remove the starter from a 1993 Chevy Lumina with 3.1 Liter Engine

Nov 30, 2009 | 1993 Chevrolet Lumina APV

Not finding what you are looking for?
1993 Chevrolet Lumina Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...