Question about Chevrolet Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I know this sounds strange but I believe the problem is in the drivers door. This is where the master switch is and controls the other doors. Have it tested or replaced. Hope this helps. Good luck.
Posted on Mar 06, 2010
GM Full-Size Trucks 1988-1998 Repair Information
Doors - REMOVAL & INSTALLATION
See Figures 1, 2 and 3
If the door being removed is to be reinstalled, matchmark the hinge position.
Fig. 1: Door hinge-R/V Series
Fig. 2: Door hinge components-C/K Series
Fig. 3: Removing the hinge spring
C/K series utilize hinges that are welded to the door and frame. No adjustment is possible except when replacement hinges have been installed.
Fig. 4: Door adjustment check points
Door edge-to-rocker panel: 6mm Door edge-to-roof panel: 5mm Door edge-to-rear pillar: 5mm Door edge-to-front pillar: 2mm
Door edge-to-rocker panel: 6mm Door edge-to-roof panel: 6mm Door edge-to-rear pillar: 4mm Door edge-to-front pillar: 7mm Door front edge-to-fender: 5mm
Shims may be either fabricated or purchased to install behind the hinges as an aid in alignment.
Hope this help, TY for using Fixya (remember comment and rated this). Good luck.
Posted on Apr 01, 2010
Testimonial: "very helpful just needed abit more info. thx "
not really sure on that one but on most first you will need to remove screw around handle that opens the door that needs to be removed. also should be screws underneth handle that pulls door shut that you will have to remove and in some cases . check around edge of door panal for more screws and if found remove them also. once all screws are removed you will need to pry on door panal slightly because there are clips behind panal holding it on. in alot of cases the clips break when removing panal but dont worry the can be bought at your local auto parts store and are very easy to replace. I usually use something flat like a small stiff putty knife to help pry door panal lose. this helps insure that you dont break of crack the panal. after all clips are off simply unplug wire connections and door handle linkage and your done. .....hope this helps and good luck
Posted on Aug 13, 2012
Tips for a great answer:
Aug 02, 2014 | 2003 Chevrolet Silverado 2500HD
Feb 09, 2014 | 1995 Chevrolet Silverado 2500
Sep 26, 2012 | 2000 Chevrolet Silverado 2500
May 29, 2012 | 1999 Chevrolet Silverado 2500
Nov 27, 2010 | 1991 Chevrolet Silverado 2500
Oct 27, 2010 | 2001 Chevrolet Silverado 2500HD
Mar 06, 2010 | 2003 Chevrolet Silverado 2500HD
Jan 19, 2010 | 2004 Chevrolet Silverado 2500 Crew Cab
Sep 02, 2009 | 2000 Chevrolet Silverado 2500
162 people viewed this question
Usually answered in minutes!