Question about 2001 Hyundai Elantra

Open Question

Changing a tcm on a 2001 hyundai elantra - 2001 Hyundai Elantra

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 958 Answers

SOURCE: 2001 Hyundai Elantra door locking problem

there is a short or a signal from the un-locking switch that is triggering your locks.

you have a switch manually to lock and un-lock your doors, the unlocking circuit is making contact.

you can try playing with your switch to un-short the switch or open it up ang check it.


tnx 4 using fixya,

drcool

Posted on Sep 26, 2008

Ad
pushpdeep17
  • 47 Answers

SOURCE: I Locked my keys in my 2001 Hyundai Elantra

wellits a smilple thing they have this round wire with a handel and they will yake the strip of ur driver side window don't worry it can be put back no need to buy a new one . and he will push the wire that is connecting both the handels and then open ur door.

Posted on Oct 22, 2008

johnny5846
  • 379 Answers

SOURCE: i do not have a fusebox diagram for my 2001 hyundai elantra

you ask which fuse , its fuse #22 for front wipers and washer . its a 20 amp , here is a picture to help identify , and locate . cheers .
7e77209.jpg

Posted on Jan 11, 2009

michigan man
  • 3533 Answers

SOURCE: oil change procedure on a 2005 Hyundai elantra

it is very easy to change the oil put the car on ramps secure the back end look for the drain plug underneath the engine make sure you have the right size wrench and when you remove the plug also check the gasket on the plug to make sure it is not cracked you will also need an oil filter wrench and my other suggestion to you is to go to autozone to see if they have a Haynes repair manual for your car and if they don't see if they can order you one in the mean time they can also print you off a diagram of how to change the oil in you car safely

Posted on Jan 20, 2009

ghost4548
  • 776 Answers

SOURCE: Hydraulic arms for 2001 hyundai elantra hatchback

Take it back to the dealership and tell them to FIX IT!

Posted on Jun 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE A 2001 2L GL HYUNDAI ELANTRA AND THE TRACTION CONTROL LIGHT IS ALWAYS GOING ON AND OFF. ? WHAT IS WRONG >?


First check if the tone wheels on your CC joints are bad..its common on those to have a crack between the teeth causing a large gap which makes tcm think there's wheel slippage

Feb 17, 2011 | 2001 Hyundai Elantra

1 Answer

Where is the out put sencor on a hyundai elantra 2000 and dose any one know wat my problem might be i just bought a new transmission and the car has trouble changin mostly wen speed is incressed and...


I am not for sure on your car, but my car has a TCM, a Transmission Control Module. I had the same problem but only at an increase in speed, not decrease. Just trying to help. Sorry it's not much.

Jan 13, 2011 | 2001 Hyundai Elantra

1 Answer

What is meaning p1529 on my elantra


P1529 means the TCM (transmission control module) has requested that the ECM (engine control module) turn on the check engine lamp. All I can tell you based on this information is that the TCM has seen something abnormal. To find out what abnormal condition the TCM saw, you'd need to retrieve the DTCs (diagnostic trouble codes) from the TCM. The most frequent culprit is either the input or output speed sensor, but there's no way to know whether they may be the issue without the TCM DTCs

Mar 20, 2010 | 2004 Hyundai Elantra

1 Answer

P1529 what i need to change


P1529 indicates that the TCM [Transmission Control Module ] has requested the engine control module (ECM) to turn on the check engine lamp. P1529 is related to your vehicle speed sensor problem.

Jan 18, 2010 | 2001 Hyundai Elantra

1 Answer

Code 1529


Whenever the 'CHECK ENGINE' light comes on, the ECU (Engine Control Unit) sets a Diagnostic Trouble Code (DTC). These codes identify the particular engine management system which caused the light to come on. P1529 is a TCM MIL request to the
ECM.
TCM = Transmission Control Module. The sluggishness is really what is known as 'fail safe' mode (3rd gear). You should have had other codes besides P1529 to identify which system in the transmission caused the problem.

Nov 02, 2009 | 2001 Hyundai Elantra

1 Answer

Code p1613 on a 1998 hyundai elantra means what


P1613 trouble code. When you start the engine, the TCM (transmission control module) sends a test signal along the wire to the ECM (engine control module) it uses to request the check engine lamp. P1613 indicates that the test signal voltage is more than 120% of battery voltage.

I'd recommend clearing the code to see if it comes back. It's possible this was a one-time error. If it does come back, it'll be very difficult to diagnose. The problems could be:
1. Improper signal from TCM (defective TCM)
2. Improper signal measurement in ECM (defective ECM)
3. Irregular feedback from an actuator that causes bleed-over into this signal circuit in either the ECM or TCM.

The last case of this I recall was a defective TCM

Oct 30, 2009 | 2000 Hyundai Elantra

2 Answers

I get a ''P1529'' error code, on our 2001 Hyundai Elantra,but cannot find what it is. Ron Hagler


this means that you have a fault code present in the Transmission control module (TCM), you need to have that module tested, the P1529 is just the engine computer telling you this code is present. here is the book difinition
P1529 TCM Mil On Request Signal

Oct 14, 2009 | 2001 Hyundai Elantra

1 Answer

6pin valve body trannny to 4pin using 6pin's TCM


First of all, which component(s) are you replacing? Only the valve body? If so, then there's something different about the one you took out compared to the one you're putting in - that can be dangerous! BEST SOLUTION: Replace/Install in the correct part at the beginning.

Apr 29, 2009 | 2000 Hyundai Elantra

Not finding what you are looking for?
2001 Hyundai Elantra Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...