Question about 1997 Nissan King Cab

Open Question

Temp gauge locate sending unit

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the temp gauge sending unit(s) located?


They are usually located at the top of engine very close to the thermostat. It should make your gauge go down if you unplug wire connector from sending unit. If so sending unit is bad. GOOD LUCK FRIEND.

Sep 15, 2014 | Cars & Trucks

1 Answer

1997 escort temp gauge pulled wire off sending unit temp gauge went to coldso


please state what engine ,diesel endura /petrol or a american big engine as in the europeon scorpio

Nov 16, 2013 | 1999 Ford Taurus

1 Answer

Where is heat sending unit ford f250 2002 located on engine


Do you mean the temp sending unit for the gauge, and also what engine do you have ?

Feb 01, 2013 | Ford Cars & Trucks

1 Answer

1990 gmc K1500 5.7L, temp. gauge not working:


To review, you have two temp sensors, one for the gauge on the dash and one for the computer. If you unplug the sensor for the computer the reading will be minus 30 degrees or over 300 which will make it very hard to start. Unplugging the sensor for the gauge would have no effect on the computer.
According to the wiring diagram, the wire for the temp gauge is green, and the wires for the temp sensor for the computer are yellow and black.

Aug 24, 2012 | 1990 GMC Sierra

1 Answer

Temp sending unit location


1 in the intake man. 1 in the cyl. head

Jun 15, 2012 | Cars & Trucks

1 Answer

Where is the temp sensor located and is it easily replaced?


There will two type of sensor, both are located on the upper thermostat housing, one is a sending unit, the other is temp sensor,if you pull one sensor and the temp gauge suddenly drop that is your temp sending unit.If you pull the other one and the vehicle kicks a high idle on and check engine light appears then you have the temp sensor

Apr 21, 2011 | 1994 Toyota Pickup

1 Answer

Location of temp gauge sending unit on 2000 Audi A6 engine. Gauge on dash shows no temp need to locate sending unit, test and replace. Thanks


in the back of the engine , below intake boot , closer to the pass. side of engine.
seats on top of plastic water flange outlet.
very hard to get. 4 wire sensor.

Apr 15, 2010 | 2001 Audi A6

1 Answer

I have a 1989 Ford F 450 Super Duty, 7.3.L DSL Can you tell me where the Oil Pressure sending unit, and the Water Temp. sending unit are located at on this motor? The Oil Pressure gauge is only fluttering...


oil pressure sending unit is close to oil filter.temp sending unit on front of intake.check fuses for temp sending unit and coolant temp gauges if all is good make sure grounding is good.if grounds good your gauges is faulty.

May 13, 2009 | 1999 Ford Super Duty F 450

1 Answer

Temp gauge shows hot even if engine has been off overnight?


Locate the temperature sending unit and pull the wire off of it. Turn the key to the on position (do not start) then have someone touch that wire to a ground source and the temp gauge should go from one extreme to another (cold to hot). If the gauge does that, you have a bad sending unit...if it does not move, you have a bad gauge or problem with the wiring to the gauge.

All the temp sending unit does is act like a variable resistor depending on the coolant temp...if it is bad, it will give you a false reading.

Mar 28, 2009 | 2003 Mitsubishi Galant

Not finding what you are looking for?
1997 Nissan King Cab Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...