Question about 2001 Ford Super Duty F 450

Open Question

Spider gears How to replace spider gears on a 2001 f-450

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace spider gear on a 2004 Mercury Mountaineer?


Do you mean the differential spider gear? If so, this needs to be done by a specialist.

Nov 02, 2014 | 2004 Mercury Mountaineer

1 Answer

How to rebuild dana 60 front?


Fully rebuild, or partial rebuild? Pinion, ring, spider gears, pumpkin, bearings? Rebuilding it FULLY and PROPERLY is a big story, one too big to relate here, and it takes quite a lot of special tooling (differential spreader, dial indicators, etc). Please don't attempt this unless you have a well equipped shop.

If you just need to replace the spider gears, that's easy. Drain the oil, remove the cover, rotate the pumpkin until you can unbolt the crosspin. Push/pull the crosspin out, rotate the spider gears until they come out. Remove the side gears. Remove all four thrust washers.

Replace all four thrust washers, then the new side gears, then mesh the new spider gears with the side gears & rotate them into place. If the crosspin hole won't line up, rotate one axle shaft until it does. Install the new crosspin and bolt it in. Replace the cover gasket and cover, refill.

Going further requires a LOT more work, but you'll need to remove the spider & side gears first anyway. If you're replacing bearings or the pumpkin or the ring & pinion, you'll need a bunch of new shims to work with until you can get the ring-pinion clearance exactly right. You'll also need a differential spreader to get enough space to remove/install the pumpkin with its bearings in place. If you're replacing the pinion gear, you'll need to take some painfully exact measurements or you'll NEVER get the ring/pinion clearances correct.

Jul 29, 2014 | Cars & Trucks

1 Answer

How to change worn spider gears


new spider gears or possibly u-joints in your rear drive shaft. Or it could just be a cheap rear i have a jeep and its done it since i first bought it.

Aug 15, 2012 | 2001 Ford F250 Super Duty Super Cab

2 Answers

The rear differentials are broken 1993 jeep grand wagoneer.


Look for a used replacement on ebay, craigslist, or junkyards. When you find the parts, then find a shop to install them for you.

Nov 23, 2010 | 1993 Jeep Grand Cherokee

2 Answers

1998 ford expedition how to install rear spider gears


Find a PICK-your-PART auto salvage and go get a whole rearend for $150 or so. You will be way far ahead. Or submit to the BLUE OVAL (dealership). Sorry no easy fix.

Sep 03, 2009 | 2000 Ford Expedition

1 Answer

What is a spider indicator?


There is no "Spider Indicator", but the fuel injection system is sometimes referred to as a spider assy because it has a central unit with individual legs (hoses) going to each cylinder. There are also gears in the differential housing that are reffered to as side or spider gears.

Jun 21, 2009 | 2001 Chevrolet Blazer

1 Answer

Spider gears shot


No you can replace the gears by removing the differential cover. Remove the gear pin and slightly pull the axles out of the gears. unbolt the drive shaft from the differential first you will then be able to move the gears so you can get at the pins.

Jun 01, 2009 | 1996 Ford Explorer

2 Answers

Increasingly loud noise coming from rear of '02 2WD 3.7L liberty


Spider gears are not difficult to replace...however, if they are worn, usually this contaminates the lube and can cause damage to carrier as well as pinion bearings...Those require precise settings with special tools and lots of experience to replace. Since you have had the noise for a long time, I can safely assume that debris has been building all that time. Spider gear set is not cheap...You may want to risk doing the job, but I would likely find another exact match, drum to drum replacement in a scrapyard. Generally I will only recommend a spider gear replacement if you have snapped a gear in half...an immediate failure
does not generate the kind of fine metal that wear does.

Apr 17, 2009 | 2003 Jeep Liberty

1 Answer

Spider gears fell on rear differential 95 ford explorer


It's not easy to put them back, but if you get the side gears in position with the axles bumped out as far as you can, the smaller spider gears can be "walked" into place. Try having your buddy rotate one of the wheels slowly until each one fits in. It's tricky but you'll get it.

Apr 04, 2009 | 1996 Ford Explorer

2 Answers

Need to get axles off a 2005 Nissan Titan


Two choices. Find an axle assy from a wrecked truck, or if your ring/pinion gears are OK, install Detroit Locker TrueTrac to replace spider gears. Good luck.

Mar 18, 2009 | 2005 Nissan Titan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...