Question about Nissan Frontier

Open Question

Pcm vibe 03 locstion - Frontier Nissan Cars & Trucks

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What does 03 vibe kill switch look like

Kill switch for what ? Fuel pump ? If so . doesn't have one . There is a circuit opening relay in the I/P fuse box >The relay is energized by the PCM - engine computer . Do you know what a relay is and how it works ? There are video's on youtube on testing relay's and the electrical circuits they control .

Dec 17, 2016 | 2003 Pontiac Vibe

1 Answer

My Pontiac vibe 2006 is showing PO6006, PO6007 code does anyone ha be any idea what it means

P0606 , P0607 ! no such codes P06006 or P06007
DTC P0601, P0602, P0603, P0604, P0605, P0606, P0607, P1600, P1621, P1627, P1680, P1681, P1683, or P2610
DTC P0606 Control Module Internal Performance
The DTC P0606 and P2610 set when the powertrain control module (PCM) has determined that the control module has an internal fault. The PCM performs continuous self checks of all internal circuits. There are 2 central processing units (CPU) within the control module. If the outputs from the two CPUs deviates from the standard level, a DTC P0606 sets. The control module has several internal clock or timer circuits. The DTC P2610 diagnostic monitors the internal timer circuit responsible for the ignition OFF operation of the evaporative emission (EVAP) system vacuum leak pump. If the there is an error in the control module timer, a DTC P2610 sets.

Feb 25, 2016 | 2006 Pontiac Vibe

2 Answers

2004 Pontiac Vibe with battery light on after battery change. it is charging also, checked that. ??????

Is it charging properly should be at least 13.8 to 15.2 volts and amperage should max out at approx the alternators rating with full load.

Apr 05, 2015 | 2004 Pontiac Vibe

1 Answer

I just received a recall on a pcm for my 2005 vibe. is this legit

contact GM dealer they will tell you if yes or not but have your VIN ready Vehicule Identification Number
hope it help

Mar 03, 2013 | 2005 Pontiac Vibe

1 Answer

Installing a new PCM on a 2005 Pontiac Vibe

The new PCM on these has to be programmed either by the people that built it or by someone who has the capability to reprogram it [usually a dealership]. The computer can be programmed before it is installed and usually they'll need the VIN#, mileage, etc to do this properly. I don't believe the vehicle will run if you put in an unprogrammed PCM. It's very rare for one of these PCM's to fail so make sure that you haven't overlooked some other problem that is mimicing a bad ECM before ordering one as they are quite expensive.

Jul 01, 2010 | 2005 Pontiac Vibe

1 Answer

Where is starter located on 03 pontiac vibe

hi this is located on the right hand side of the engine on top of the transmission, the best way to locate it is to follow the + lead from the battery and on the end of that will be the starter motor....hope this helps

Jun 03, 2010 | 2003 Pontiac Vibe

1 Answer

Replace clutch

the axles are held into the trans with internal "SIR" clips, they just pull out, you need to pull straight out in a quick snapping motion, they can be very difficult to remove

Nov 16, 2009 | 2003 Pontiac Vibe

1 Answer

Tranmission solenoid 2005 pontiac vibe

we had the computer code p2716 on our 2005 pontiac vibe -shift solenoid. gm says to replace the pcm before you do anything else.  we tried this and it works.

Dec 16, 2008 | 2005 Pontiac Vibe

1 Answer

Check Engine Light Code

If you have a PCM problem it will be covered under the 8yr fed warranty if you have under 80,000 miles. Take it to a dealer

Jun 13, 2008 | 2006 Pontiac Vibe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

77194 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides