Question about Ford Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
i see, we ask for help and you want to charge us for it. But if we have solved the problem, you want us to tell you how we did it. Well my time is valuable too, i figure it took me about three hours to figure out the problem and fix it, at my hourly rate of $100 an hour, yes i am a business executive that works on his own cars, it will cost you $300 for the answer.
Posted on Jan 03, 2009
Remove power to all aftermarket components, if you know how to use a multi-meter connect to power source inside vehicle.. Drive normal, if voltage drops below 12v while driving, it is faulty alternator. If bat light comes on and voltage is above 12v the plug on the alternator might be correded and throwing faulty light, or bad ground in gauge cluster...
Posted on Jan 23, 2009
Yes it is the tool for fuel lines and ac lines. Your local autoparts store should have them, they are universal. You need to use the small end for the fuel filter.
Posted on Jun 02, 2009
the MAF (mass air flow) meter may be faulty, this is typical of the symptoms you are getting. It is just after the air filter in the large bore pipe leading to the inlet on the engine, not a cheap part but you may get one on ebay, just remove and unplug the original and swap it.
Posted on Dec 06, 2009
Tips for a great answer:
Feb 22, 2013 | Cars & Trucks
Mar 30, 2010 | 2000 Ford Excursion
Dec 19, 2009 | 2000 Ford Excursion
Dec 18, 2009 | 2000 Ford Excursion
Aug 18, 2009 | 2005 Ford Excursion
Mar 26, 2009 | 2000 Ford Excursion
18 people viewed this question
Usually answered in minutes!