Question about 2000 Nissan Frontier

Open Question

Temp gauge doesn't move - 2000 Nissan Frontier

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Gas, fuel, and temp gauge doesn't work


You have blown a fuse..check fuse box. There may be one fuse box one in the cabin but also check for the fusebox in the engine compartment.

Oct 04, 2017 | 1992 Dodge Caravan

1 Answer

Fuel gauge sensor


Yes, the sending unit is in the tank. If you unplug the connector at the tank and ground the gauge's sender unit wire to metal, with key on, the dash gauge should jump to full or near full. This verifies the dash gauge is working properly, and the problem is with the sender unit in the tank. If the gauge doesn't move when grounded, then the gauge or wiring from tank to gauge is not correct.
Good luck.

Jan 24, 2012 | 1988 Jeep Wrangler

1 Answer

Temperature needle stays on the hot , have changed temperature sensor but it still stays on the hot and the engine is not overheating or leaking anything..what is making it stay on the hot


replace the thermostat,, and make sure that the fan engages , just because the fluids don't boil over doesn't mean the temp isn't to high, if your saying that the temp gauge is stuck on the hot setting, and doesn't move even when the car is cold,, thats a different problem,, if thats the case whats the make , model , and year

Sep 11, 2011 | Ford Thunderbird Cars & Trucks

1 Answer

My temp gauge in my 85 s10 doesn't work. it sits normal when the truck is off but when i turn the truck on it goes down to nothing and doesn't move? what might the problem be


sensor unit or wiring 2 the sensor try removing the wire see what gauge reads it should drop back 2 nothing if not problem in wiring or gauge it self

Sep 08, 2011 | 1991 Chevrolet S-10

1 Answer

The original temp sensor was broken So I replaced it twice and it stillisnt working


Have you verified thet the temp gauge works? If not and you have a single wire going to the temp. guage sensor, you can ground the wire coming out of the temp gauge sensor, cut the ignition on, and verify the gauge peggs hot. If this doesn't happen, verify the integrity of the wire. If the wire is good, replace the gauge.

Jul 23, 2011 | 1996 Mercury Grand Marquis

2 Answers

Temperature gauge fluctuates and the heater blows cold air


Definitely check your fluid level in your radiator. Top it off all the way. I've seen that happen multiple times on cars that were low on anti-freeze. If that doesn't work try replacing your thermostat. It's cheap and the easiest place to start if topping off the fluid doesn't get you fixed up.

Oct 16, 2009 | 1997 Chevrolet Camaro

1 Answer

Temperature gauge doesn,t move. load noise from under bonnet sounds like fan but really load.


HI, due to the damage to the bonnet that protects the fan(fan shroud), this damage has caused a malfunction within the temperature guage sending unit(temp sensor).

Simply replacing the temp sensor will fix this issue.it could be a lose or ripped wire as well. make sure the temperature sensors wires are connected and not torn.

May 15, 2009 | 1992 Audi 80

Not finding what you are looking for?
2000 Nissan Frontier Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...