Question about 2007 Nissan 1400 Bakkie

Open Question

Over fueling Nissan 1400 - 2007 Nissan 1400 Bakkie

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I drive a Nissan 1400 Bakkie its doesn't want to hold idling what czs that


that could be the needle and seat in the carburetor is worn and needs to be replaced. The needle and seat is there to set float level and regulate fuel supply

Aug 12, 2016 | Nissan Cars & Trucks

1 Answer

Nissan 1400 consuming too much petrol. How do you adjust air ratio in the carburator


No reference to your model 1400...but if it has a carburetor the air/fuel mixture is set with 2 screws on the front side...to adjust each one...car must be running, turn each screw clockwise until your motor starts to stall...then back out (counter-clockwise 1 1/2 turns from stall...should smooth out as fine tune adjusting...each screw must be re-set this way...could also be dirty or clogged air filter, dirty carb throttle body...and need new spark plugs...probably needs the standard parts tune-up...Hope this helps.

Jun 09, 2015 | Nissan Cars & Trucks

1 Answer

I drive a Nissan 1400 bakkie (not a champ) i drives good and then starts jerking and wants to die as soon i i give petrol it sounds like its smothering


hi, personally ..i love that bakkie. Ok you changed points condensor, petrol filter! please check.. When it cuts out 1. if the ignition coil is not hot, if so thats your problem.2. also on the carb... over the needle and seat there is a tiny filter... somtimes gets blocked. 3. also check when it stolls if the fuel pump is not hot or pull the outlet fuel from the pump
and crank the engine... note if fuel comes out sufficiently.

May 21, 2014 | 2006 Nissan 1400 Bakkie

1 Answer

CARBURATOR OF NISSAN 1400 BAKKIE


the ball bearing will be a non return valve for the accelerator pump. When the pump is moved to suck in fuel from the bowl it lifts of the seat and when the pump is pressed down the force of the fuel closes it off and the fuel is squirted in to the manifold.

Jan 19, 2014 | Nissan Cars & Trucks

1 Answer

Nissan 1400 very heavy on fuel


. Check cat converter for failure. tyres will use up fuel especially if the pressure is low. Checkf fuel pressure in the manifold. Check the air cleaner and replace if old. If cpu fuel injected check for fault codes check that it goes into overdrive if an auto.

Mar 18, 2013 | Cars & Trucks

1 Answer

My nissan 1400 champ 2006 model cuts on fuel as I travel even if left in the sun for a long time. How can I overcome this problem.


have you replaced the fuel cap recently with a non vented type? Could create a vacumme in tank

Nov 17, 2012 | Nissan Cars & Trucks

1 Answer

When i apply brakes on Nissan 1400 engine stops running


Check the wiring connections and plugs on the rear light units. The fuel pump shares its earth connection with the rear lights.

May 30, 2011 | Nissan Pickup Cars & Trucks

1 Answer

The "low fuel" warning light does not work in my


check the fuse or your blub is blown

Jan 26, 2011 | 1996 Nissan Sentra

Not finding what you are looking for?
2007 Nissan 1400 Bakkie Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...