Question about Cars & Trucks

Open Question

Timming chain replacement nissan qg18de twin cam

Alignment marks twin cam qg18de

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bmw_tech_38
  • 113 Answers

SOURCE: i need to know if you got a N40 / N42 engine.

Hi johnsmith992 this engine has a timing chain and has coilpacks and you need not do anything to service these items. regards mark

Posted on Jan 28, 2009

  • 13 Answers

SOURCE: cannt find tims marks on 2000 ford focus twin cam

there are no marks on the cams line the crank up you should see marks on it and on the cams take a flat piece of steel like a flat file and put it on the end of the cam shafts the side near near the drivers side ounce you take a look youll see what i mean this should help you out

Posted on May 11, 2009

  • 12 Answers

SOURCE: Correct way to align timing marks

hi -- the timing marks on a twin cam are tricky!! heres how- turn the motor over to tdc on the bottom pulley,this will align two marks on the lower cog-----now on the top cog,it has an obvious mark near the teeth-- well disregard this for now!! the cog has a hole in it,in one of the spokes,well this goes at 12 o,clock and lines up with a mark you will see on the housing! now if you are right you will see the mark near the teeth is at around 4,oclock---i just did one and it is right--cheers

Posted on May 28, 2009

  • 1 Answer

SOURCE: Timing Marks to replace the

It was so easy once you posted us the diagram, being a Japanese import, one never knows what if anything has been done to these vehicles, and without the relevant paperwork they can be a nightmare.

Posted on Dec 03, 2009

postings909
  • 130 Answers

SOURCE: I am replacing the timing chain on my 02 saturn. I

okay i posted you a picture of the postion. be carefull not to turn the crank or the cams or you will damaged the valves. let me know if you need more hlep.

Posted on Jul 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is a 2000 nissan 2.4 twin cam with a timing chain a interference engine?


There is no reference to it being an interference engine. However it is always advisable to treat all motors as interference motors when setting the timing as that way there will be no bent valves
Always position no 1 piston on TDC compression stroke before working on the chains
That way all timing marks will be aligned or close to alignment when refitting the chain.

Mar 01, 2015 | Nissan Cars & Trucks

1 Answer

Timming chain broke


place no 1 piston at TDC compression stroke. There are procedures for the timing of the balance shafts but if it is only the timing chain I will go to that
Align uniquely coloured chain link with intake camshaft sprocket timing mark-- INT--. ( this will be pointing at the 2 o'clock position)
install timing chain and sprocket as an assembly
align first matching coloured chain link crankshaft timing mark (5 o'clock position)
align the second matching coloured chain link with exhaust cam shaft timing mark--EXH ( at the 11 o'clock position
There is a special procedure to reset the balance tensioner and it is different to the timing chain procedure.

To reset cam shaft timing chain tensioner push piston fully and turn clockwise until locked
Once the tensioner has been compressed ensure the distance from end to end is 2.83 inches . If not repeat the resetting process
vehicles 30.000 miles the tensioner is released when the engine is first started . In vehicles over 30.000 miles manually release tensioner by tapping the plunger
Note cam shaft and crank shaft sprockets bolts MUST only be used once. If you want details on the balancer chain procedure then make a comment in the box
use tension wrench and a degree gauge
cam bolts are tensioned to 63 ft lbs + 30 degrees
crank shaft pulley is tensioned to 74 ft lbs + 75 degrees

Feb 02, 2014 | 2003 Saturn ION

1 Answer

Chain mark timing gabriel align


Here's a link to your timing chain.

Jun 07, 2013 | 1995 Nissan Maxima

1 Answer

How do you align the timing belt on 1995 Mitsubushi RVR twin cam?


there is a little notched out mark on both cam shaft gears and one notched out on both heads put those marks together there is one on the crankshaft pulley and the back timming belt cover line those 2 up depress the belt tensioner all the way in you might have to use a small allen wrench put the belt on and let the tensioner back out now make sure all your marks are still lined up and your ready.

Mar 30, 2012 | 2011 Mitsubishi RVR

1 Answer

I need to know how to set egine timeing when replaceing timeing belt...


if its a twin cam 2.0L, turn crank over until these marks align up with centre crank bolt (to remove pulley remove smaller outer bolts) then remove belt tensioner to remove belt should use cam lock tool to hold cams in position. turn tensioner with allen key anti-clockwise to get pointer in "V" section then do up 13mm retaining bolt. turn over by hand a couple of times and recheck tensioner position as well as timming marks all align up again before reassembling and starting engine.

stevenhurc_0.jpg

stevenhurc_1.jpg

Jan 22, 2011 | 2000 Daewoo Nubira

1 Answer

Changed timing chain and need to align to cam with the crang


Align the chain with the colored links on the chain over the marks on the cams.Twin cams Have a small hole on the cam gears that will align with a hole in the front of head.Crank Gear has a pip mark that goes straight up.colored links on crank go to the 5 & 7 Oclock position on the lower crank gear with pip mark on crank gear at 12:00.Hope this helps

May 22, 2009 | 1995 Saturn Sl

1 Answer

I need to know if you got a N40 / N42 engine.


Hi johnsmith992 this engine has a timing chain and has coilpacks and you need not do anything to service these items. regards mark

Jan 27, 2009 | 1999 BMW 318 ti

1 Answer

2001 chrysler concord 2.7 liter timing set


I have a similar problem. I just replaced the water pump and now the POS wont start. Like it is not getting fuel>

Aug 04, 2008 | Chrysler Sebring Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...