Question about Toyota Pickup
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
two first things to check fuel and spark ...fuel make sure your fuel pump is working its messy but the easiest way is to pull the fuel line "only one connection" and turn key to on then press gas pedal and gas should pump out if not fuel pump is bad... if thats not it you want to check for spark easiest way is to pull one of the spark plug wires and stick a screwdriver in the end then hold the screwdriver to where the metal shank is approx. 1/4" away from any metal surface ... hold the screwdriver without touching the metal shank!!! have someone crank the engine you should see a spark intermittently between the screwdriver and the metal youre holding it close to.. if thats ok the only other thing i can suggest is get a battery with more cca "cold cranking amps"..hope this helps..OH YA ON A SAFER NOTE!!!...DONT LOOK FOR SPARK WITH THE ENGINE WET WITH FUEL..
Posted on Sep 19, 2008
1°00’ ± 45'
3°00’ ± 1°
Steering axis inclination 13°00’ ± 45’
Camber, caster and steering axis inclination are not adjustable.
If measurements are not within the specification, inspect the
suspension parts for damaged and/or worn out parts and replace
them as necessary.
(0.08 ± 0.08 in.
This is the only Land Cruiser Specs I could find, hope it helps
Posted on Apr 18, 2009
Remove the 2 bolts holding the grab handle ( 10mm) Remove the screw holding the pull handle plastic cover and remove the cover. Use a fork and pry the panel away from the door and you will be able to pull it off. Before refitting, check all of the plastic clips that hold the panel to the door, some will have broken off. Remove them and fit them back on to the trim panel and glue them on. Refit is reverse as removal. Hope that helps
Posted on Mar 29, 2010
I have info on a 96 power door glass.....should be very simular. the triangle piece at the top front is just clipped on, the plastic piece around the opener handle is just clipped on. in the pull handle there are two screws, and the plastic piece just pops up. under the red reflector the is a screw. There is a "U" clip behind your window crank, remove this clip and the crank will pull straight out. (use a screw driver to open the gap between the crank and the door panel, to see the clip, Use a hook tool too remove the clip...you can also use a cloth or panty-hose in the gap and turn the crank, the cloth will grab the edge of the clip and pop it off)
after removing all the clips and screws the door panel is held on with plastic plugs, just pull the panel sraight out toward youself.
hope this helps.
Posted on Apr 01, 2010
Tips for a great answer:
Dec 28, 2016 | Cars & Trucks
Feb 07, 2015 | Toyota Cars & Trucks
Aug 20, 2013 | Toyota LandCruiser Cars & Trucks
Nov 17, 2012 | 1995 Toyota Land Cruiser
Feb 20, 2012 | Cars & Trucks
Nov 07, 2010 | 1997 Toyota Land Cruiser
Sep 19, 2008 | 2001 Toyota Land Cruiser
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: