Question about 2002 GMC Envoy

Open Question

Steering wheel dic buttons not working - 2002 GMC Envoy

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 29 Answers

SOURCE: reset change oil warning with no DIC o steering wheel

Turn the key till all the lights come on then press the gas pedal to the floore 3 times in 5 seconds .

Posted on Mar 29, 2009

  • 753 Answers

SOURCE: the driver information center buttons on the

there is a good possability that either the button contacts are bad,the very thin wires are broken or the contact area of the horn ring that the circuit using is bad.You will need to have it diag.at a shop rather than just trying parts to fix it.

Posted on Feb 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuel reset button for a 2004 Chevrolet Silverado 2500 HD 6.0 L fuel injection?


For vehicle with steering wheel conrtols ,to reset the fuel,Press and hold the select button for five seconds while the fuel filter life message is displayed . The message will appear on the DIC for ten second
For vehicle without steering wheel control ,do the following, without pressing the pedals,turn the ignition key to the on position without starting the engine ,wait five seconds,completely press the the brake and the accelerator pedal simutaneously, and hold for ten seconds ,the system is now reset ,
The next time the engine is started the message will no longer be displayed, Always reset after a fuel filter change

Mar 03, 2012 | 2004 Chevrolet Silverado 2500HD

1 Answer

How to change languages on instruments


{: ) Press the customization button (the button on the steering wheel with a bold letter i ) until LANGUAGE: ENGLISH appears in the display. To select your preference for display language, press the select button (bent arrow symbol) while LANGUAGE: ENGLISH is displayed on the DIC. Pressing the select button will scroll through the following languages: • ENGLISH (default) • FRANCAIS (French) • ESPANOL (Spanish) Choose one of the available options and press the customization button while it is displayed on the DIC to select it and move on to the next feature.
If you accidentally choose a language that you do not want or understand, press and hold the customization button and the trip information button at the same time. The DIC will begin scrolling through the languages in their particular language. English will be in English, Francais will be in French, and Espanol will be in Spanish. When you see the language that you would like, release both buttons. The DIC will then display the information in the language you chose.
You can also scroll through the different languages by pressing and holding the trip reset stem for four seconds, as long as you are in the odometer mode.

Dec 31, 2010 | 2006 Chevrolet Trailblazer

1 Answer

Calibrating compass


Yes you can.What you have to do is press the mode button on the driver info center(DIC).Press and hold the set button for 3 seconds.The DIC will display the zone.This is what part of the country you live in.What state your in.I don`t know what Zone your in so I don`t know if it is in the correct zone or not.They go from i-15.This will determine how accurate your compass will be.If you press set it will change the zones.If it is the correct zone then press the mode set button til the DIC displays calibrate compass.Press set and the DIC will tell you to drive in circles.Find a large empty parking lot to do this.I just crank the steering wheel and keep going in circles.The DIC will say calibrating.When the compass shows direction and temperature it is done calibrating and you can stop driving in circles.Hope this helps.Good luck.If you need to know what Zone your in Just post back with the state you live in and I can tell you the zone.

Mar 29, 2010 | 2002 Buick Rendezvous

1 Answer

The driver information center buttons on the steering wheel are not all working. only 4 out of the 8 work. checked the ipc/dic fuse which is not blown. how to fix?


there is a good possability that either the button contacts are bad,the very thin wires are broken or the contact area of the horn ring that the circuit using is bad.You will need to have it diag.at a shop rather than just trying parts to fix it.

Feb 26, 2010 | 2006 GMC Yukon Xl Denali

1 Answer

Automatic climate control went to celcius (C) instead of (F) How do we get it back?


use driver information center button ENG/MET: Use this button to change the display
between English and metric units.
dic buttons are onleft hand side of dash closest to steering wheel.
Cheers!

Feb 14, 2010 | 2000 Buick LeSabre

1 Answer

Hey


Mine aren't either. I have an 03 Tahoe LT with steering wheel controls. The audio controls work just fine, but not the dic controls. Can someone please advise? Thanks!

Jan 14, 2010 | 2006 Chevrolet Tahoe

1 Answer

2002 envoy side mirrors continually change settings, how can I fix this so I don't need to adjust them every time I unlock my truck?


Go in through the DIC using the buttons on the steering wheel to where it says curb view assist...and turn off.

Jul 24, 2009 | 2002 GMC Envoy

1 Answer

Service engine soon light on in 2004 buick rendevous after accident. no codes given. turns on when engine starts.ran scanner- no codes... had to reset everything after car repairs. told not related to...


oh thats the change oil light expect it every 3500 to 4500 miles they glow.. you can usually reset it by holding down the trip button with the car off and then turn the key to the II position where everything lights up
so read me >>>>>
Buick Rainier 2004-06, Buick Rendezvous 2002-05 w/o (DIC) Driver Information Center
Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three time in five seconds. If the CHANGE OIL SOON’ indicator flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on for five seconds, repeat the procedure.
Buick Rainier 2004-05 wI (DIC) Driver Information Center
The DIC display is located on the instrument panel cluster above the steering wheel. The DIG buttons are located on the steering wheel. Press button with the gas pump symbol to display engine oil life. Press button with the arrow symbol to reset engine oil life display.
Buick Rendezvous 2002-06 wI (DIC) Driver Information Center
To reset Service Reminder Indicator, turn ignition on with engine not running. Press the MODE button until DIC reads oil life left hold SET to reset. Press and hold the SET button until 100% is displayed. You will hear three chimes and the change oil message will go out. If the CHANGE ENGINE OIL’ message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

May 08, 2009 | 2004 Buick Rendezvous

1 Answer

How to reset oil life monitor on 2008 G5. I don't have an owners manual.


Hi does your car have a DIC there will be 2 buttons on the left side of the steering wheel spoke if so scroll though the menu once you get to oil life percent push and hold the button with the arrow then it will read oil life 100% ( it takes a bout 3- 5 sec to reset)

If you do not have a DIC then turn the key to on WITHOUT engine running and press the gas peddal to the floor 3 times FAST the oil life light will flash then go out

if you have any problems let me know but that should work

May 07, 2009 | 2008 Pontiac G5

1 Answer

Reset change oil warning with no DIC o steering wheel


Turn the key till all the lights come on then press the gas pedal to the floore 3 times in 5 seconds .

Mar 29, 2009 | 2003 GMC Sierra

Not finding what you are looking for?
2002 GMC Envoy Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...