Question about 1996 Geo Tracker 2 Door

1 Answer

Timing marks 1.6 liter 1996

Changing timing belt and replacing distributer

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Geo Master
  • 20,706 Answers

They timing here (both are there and full FSM 96)
see timing belt G16b
do not use the 2 false marks !!! see real photos there, unlike most books.
http://www.fixkick.com/

Posted on Jan 17, 2016

  • 1 more comment 
  • Anonymous Jan 26, 2016

    the cam cog wheel has 2 false marks
    as seen on page above

    in search box there type
    t belt
    and
    ignition timing
    its all there.

  • Anonymous Jun 01, 2016

    do not use the "I" mark key slot
    do not use "I" mark , timing mark slash.
    use "E" only...

    "I" marks are for different suzuki engines.this car is G16b, 16valves, in usa.
    engine is free running.

  • Anonymous Jun 05, 2016

    that page covers all G16s, 89-98. and more.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 95 geo metro

I just did my 95.
The bottom outside pulley has a little cut in it,and its little.Line that at 5 degrees the 3rd line on the plastic marker.
Now on the cam,there`s 2 marks.use the one that has the nipple under it and line it with the v on the back plate.

and wala.

Posted on Jul 13, 2008

  • 1 Answer

SOURCE: I'm replacing the timing belt

you should have 3 gears that hve a mark on them. line them up with each other, then you need to get a timing light, checker and auto zone rent them, and you loosen the 2 bolts on the distributor not the cap but the whole unit. then turn it as you look at where the light is flashing your crank marker and there is markers on your cover for where it is suppost to be

Posted on Aug 02, 2008

  • 80 Answers

SOURCE: 95 geo metro

alldata,com can get you a full instruction book online.

Posted on Aug 04, 2008

  • 58 Answers

SOURCE: geo metro timing diagram

woot i feel your pain i had the same problem. go to autozone.com and go to thier vehicle repair.
enter your year make and model and find it. but please hear me on this one.. be carfule thier are like 2 timing references and one timing mark. USE THE DOT. pls i learned the hard way. lol use the dot on the cam sproket. good luck

Posted on Jan 29, 2009

  • 31 Answers

SOURCE: Am Replacing Timing Belt On 1990 GEO Tracker 4x4

most of the time there will be one mark on the crank pulley gear and the one on the cam pulley gear.usually a dot or a straight line.

Posted on Apr 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Aligning timing belt after breakage on 1996 toyota camry 2.2 liter 4 cylinder


Dustin, The attached links will explain timing alignment on 2.2 Camry engine. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Diagram of Timing Belt Marks and Installation
work on camry engine
Aligning timing belt after breakage on 1996 toyota camry 2 2 liter 4...
DIY GEN3 Timing Belt Waterpump Oil Seal Change Part 1 Toyota Nation Forum...

May 15, 2016 | Toyota Cars & Trucks

1 Answer

How to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve engine


Choose:

1994 Mazda MPV timing belt replacement, 6 cylinder DOHC ...

? 3:46
https://www.youtube.com/watch?v=sD2G-NzycvU
Aug 11, 2011 - Uploaded by rsarp
1994 Mazda MPV timing belt replacement, 6 cylinder DOHC 3.0... engine so the valves would not be bent ...

How to replace the timing belt on a 1994 mazda 929 3.0 ...

www.fixya.com/.../t25991928-replace_timing_belt_1994_mazda_929_3...
4 hours ago - how to replace the timing belt on a 1994 mazda 929 3.0 dohc 24 valve... I have a 2000 Mazda 626 4cyl 2.0 liter DOHC engine replacing the timing belt, what ... 2004 6s, 3l. where is the canister purge valve solenoid located?

Where are the timing marks on a 1994 mazda 929 3.0l - Fixya

www.fixya.com/cars/t25991952-timing_marks_1994_mazda_929_3_0l
4 hours ago - where are the timing marks on a 1994 mazda 929 3.0l - Mazda Cars ...1994 Mazda E2000 Cam Timing Mark Positions to Replace Timing Belt ... on a 1994mazda v6 dohc 24 valve engine How to align the timing mark on the ...

Mazda Timing Belt Replacement



Dec 03, 2015 | Mazda Cars & Trucks

1 Answer

How to install a toyota 2y distributer


Remove No. 1 spark plug turn engine over till you feel compression on No.1, line up marks on crank pully and timing gear cover , fit distributer making sure rotor points to No. 1 on dist.cap rotate distributer till contacts just start to open .start engine and reset with timing light.

May 30, 2014 | 1996 Toyota Hilux

1 Answer

Camry timing belt


I am assuming you are referring to a 2.2 liter 5SFE engine. If so camshaft timing mark is dot located on forward face of sprocket mid spoke/or a notch on inboard rim of sprocket. locate mark and paint with white paint. Locate timing mark-small raised dot on plate behind sprocket at approx. one o-clock position paint this white for easy reference. Crank shaft sprocket has small notch on inboard rim. paint white for reference. align cam timing marks, then align crankshaft mark with #0 on timing scale. Adjust tensioner and belt is aligned. I recommend changing idler pulleys and water pump when replacing belt as preventative maintenance. Also inspect shaft oil seals and replace as needed. Performing these services now will save time and money in the future.

May 09, 2014 | 2001 Toyota Camry

2 Answers

I have 1996 Dodge Advenger ES changed the timing belt, now can't get fire. Changed distributor, rotary button, wires, plugs. Can you help me get fire?


check and be sure you didn't turn the cams when changing the belt, and that the crankshaft to cam timing is right.

Mar 24, 2011 | 1996 Dodge Avenger

1 Answer

Have a 94 cavalier 2.2 liter,timing chain


Install the cam sprocket, timing chain, and timing chain cover. Make sure the dot on the crankshaft gear is pointing towards the center of the Camshaft gear bolt. Make sure the hole in the Camshaft gear is pointing towards the center of the crankshaft. Be sure to remove the nail holding the chain tensoner back, before installing the timing cover The round hole in the cam gear is the alignment mark

Mar 13, 2010 | 1996 Chevrolet Cavalier

1 Answer

Cant get no. 1 piston top dead center with the timing belt


Ive replaced the head gasket two times (two cars) with this engine, and had a little trouble with this. The mark on the intake camshaft that matches the mark where it connects to the distributer is tricky. The mark on the distributer connection is not supposed to match up square with the mark on the camshaft, if you do match them completely, then the teeth wont match up with the timing belt completely (#1 piston position) instead, the mark shows you which flat surface to allign if that makes since. The notch (dist side) is on a flat hex surface, it is not in the middle of the surface but it should be. as long as the two pieces hex sides are lined up, you should then be able to get good timing with the #1 position after turning the crankshaft to get the timing belt to line up. its hard to explain but all markings are right for the timing belt, but the distributer notch to line up the cams for timing is a little off. match the two surfaces (notch should me a few mm to the right of the other mark) Ive done this on 2 toyotas (87 celica and 89 camry) and they both work fine now. Hope this helps.

Apr 17, 2009 | 1990 Toyota Camry

2 Answers

2001 kia optima 2.5L setting the timing


TDC stands for Top Dead Center, however it is only to set the cylinder number ! at TDC, if yu know where the timing marks are align the crank pulley mark to the "0" of the timing mark, usually this can be achieved by setting the crank shaft doel pin to twelve 0 clock position.

Oct 17, 2008 | 2002 Kia Optima

Not finding what you are looking for?
1996 Geo Tracker 2 Door Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7727 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...