Question about 2001 Suzuki Grand Vitara

Open Question

Tighten valve cover Suzuki 2.5 - 2001 Suzuki Grand Vitara

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Valve clearance on suzuki vitara 1999 1.6


  • Set the engine to Top Dead Centre (TDC) of the compression stroke for the cylinder to be adjusted.
  • Check the valve clearance. The valve clearance specifications are as follows:

    Intake valves: 0.005-0.007 inches (0.13-0.17mm) Exhaust valves: 0.005-0.007 inches (0.13-0.17mm)
  • After adjustment, tighten the lock nuts to 11-14 ft. lbs. (15-19 Nm).
  • Repeat for each valve to be adjusted.
  • Feb 16, 2017 | Suzuki Cars & Trucks

    1 Answer

    How to remove cam shaft of m15a suzuki swift


    Do a search on Youtube, many people load such videos there.

    Jan 15, 2017 | Suzuki Swift Cars & Trucks

    1 Answer

    Suzuki engine code P0496, evaporative emission system high purge flow pending


    tank vent failure
    always tighten cap, first then reset the code and drive
    always. unless you like work.
    the other tests for EVAP are all covered in the FSM.
    the factory service manual.
    suzuki pit stop sells it. google that.
    or log in to alldata.com and read. its all there.
    testing valves.
    pressure tests. all.

    Jul 15, 2014 | 2009 Suzuki XL7 Limited

    1 Answer

    How to replace spark plug well o-rings 2003 ford taurus 3.0 durtec


    Buy valve cover gasket kit with plug tube seals .. remove valve cover.. Clean everything .. replace seals replace valve cover gasket and reinstall valve cover. Clean sparkplug wires connectors.. Try Rockauto .com for this part about $25. about 1/2 price of local auto parts store. Tighten Valve cover screws to correct torque specs.. for best job.

    Jun 01, 2014 | 2003 Ford Taurus

    1 Answer

    I loosened my valve cover bolts and need to tighten them and don't know what the torque specs are I have a 2005 Suzuki Boulevard s83 1400 cc


    ok the bolts near the intake manifold put them at 4-5 ft.lb and the bolts near the spark plugs 6-8 ft.lb that should be good

    May 11, 2014 | Cars & Trucks

    2 Answers

    Procedure of tappet adjustment


    make sure engine is warmed up. Put cylinder one at top dead center,remove the valve cover,loosen all adjustment lock nuts,adust intake and exhaust valves on cyl #1 and intake valve on #2 and exhaust valve on #3. now rotate crankshaft 360 degrees clockwise, now adjust intake valves on cyl#3 and cyl #4 and exhaust valves on cyl #2 and cyl #4.now tighten lock nuts and install valve cover. specs are intake valves 25mm clearance and exhaust 28mm clearance, use a feeler gauge,heres a picture to show you where to check clearance.7675a52.gif

    Mar 14, 2010 | 1986 Suzuki Samurai

    1 Answer

    Oil leak


    Oil leak can be attributed to several factors.
    1. Gasket failure.
    2. Uncontrolled Crank case pressure Failure.

    RECOMENDATION:
    Tighten both the valve cover and oil pan bolts.
    Replace the Positive Crankcase Ventilation Valve and vacuum line.,

    INFO: PCV
    This is a valve causes a negative vacuum on the engine while its running, As to say if it had a leak in a valve cover it should not be leaking while its running, only when the engine it turned off.

    Hope this tip guides you in the correct direction to solve this problem.

    R/
    David

    Feb 20, 2010 | 1994 Suzuki Sidekick

    1 Answer

    Cant find out the cylinder head torque settings for a 1997 2.0L ptrol 24 valve vitara


    Cylinder head instructions
    Cylinder head
    Renew bolts No
    Stage 1 Tighten 35 Nm
    Stage 2 Tighten 75 Nm
    Stage 3 Tighten 105 Nm

    Feb 13, 2010 | 1999 Suzuki Vitara

    1 Answer

    I need a diagram of a 1995 ford escort engine


    96 escort 1.9L

    bb97132.gif
    e0d7524.gif

    Engine Components
    Item Part Number Description 1 6766 Oil Filler Cap 2 6A548 (8 Req'd) Valve Cover Bolt 3 6582 Valve Cover 4 — Exhaust Manifold Shield-to-Exhaust Manifold Nut (4 Req'd) 5 9A462 Exhaust Manifold Shield 6 — Exhaust Manifold Shield Stud (4 Req'd) 7 9430 Exhaust Manifold 8 9454 Exhaust Manifold Nut 9 9448 Exhaust Manifold Gasket 10 — Exhaust Manifold Stud (Fine Thread), Short (4 Req'd) 11 — Exhaust Manifold Stud, Long (1 Req'd) 12 — Exhaust Manifold Stud (Medium Thread), Short (1 Req'd) 13 6518 Valve Spring Retainer Key 14 6514 Valve Spring Retainer 15 6513 Valve Spring and Damper, Intake 16 6C515 Valve Tappet Guide Plate Retainer 17 6571 Valve Stem Seal 18 6513 Valve Spring, Exhaust 19 12405 Spark Plug 20 6269 Camshaft Thrust Plate 21 — Camshaft Thrust Plate Bolt (2 Req'd) 22 — Cup Plug 23 6B273 Camshaft Oil Flow Control Rod 24 6K292 Camshaft Front Seal 25 6256 Camshaft Sprocket 26 6278 Camshaft Sprocket Washer 27 6K252 Camshaft Sprocket Retaining Bolt 28 6L269 Camshaft Sprocket Key (5 x 18) 29 6250 Camshaft 30 6051 Head Gasket 31 6A008 Cylinder Head to Block Dowel 32 6010 Cylinder Block 33 6507 Intake Valve 34 6505 Exhaust Valve 35 6049 Cylinder Head 36 — Intake Manifold Stud (7 Req'd) 37 17A084 Engine Lifting Eye 38 — Engine Lifting Eye Bolt (2 Req'd) 39 9439 Intake Manifold Gasket 40 — Bolt 41 9723 Accelerator Cable Bracket 42 9424 Intake Manifold 43 — Intake Manifold Nut (7 Req'd) 44 9D476 EGR Valve Gasket 45 — Exhaust Gas Recirculation (EGR) Valve Bolt (2 Req'd) 46 9D475 EGR Valve 47 — Fuel Injection Supply Manifold Bolt
    (2 Req'd) 48 9F593 Fuel Injector 49 9D930 Fuel Charging Wiring 50 6786 Oil Level Indicator Tube Bracket 51 — Oil Level Indicator Tube Bracket Bolt 52 6754 Oil Level Indicator Tube 53 6750 Oil Level Dipstick 54 9D280 Fuel Injection Supply Manifold 55 — Vacuum Fitting 56 9E498 Main Emission Vacuum Control Connector 57 — Vacuum Tap 58 — Vacuum Hose 59 9B989 Throttle Position Sensor 60 — Screw and Washer 61 9F782 Throttle Position Sensor Gasket 62 — Throttle Body Bolt (4 Req'd) 63 — Idle Air Control (IAC) Valve Bolt
    (2 Req'd) 64 9F715 Idle Air Control Valve 65 9F670 Idle Air Control Gasket 66 9E926 Throttle Body 67 9E936 Throttle Body Gasket 68 — Vacuum Fitting 69 — Camshaft Position Sensor Screw 70 6B288 Camshaft Position Sensor 71 8255 Water Hose Connection Gasket 72 — Water Hose Connection Bolt (3 Req'd) 73 8592 Water Hose Connection 74 8575 Water Thermostat 75 6065 Cylinder Head Bolts 76 6500 Valve Tappet 77 6K512 Valve Tappet Guide Plate 78 6564 Rocker Arm 79 6A528 Rocker Arm Seat 80 6A527 Rocker Arm Bolt (8 Req'd) 81 — Ignition Coil Mounting Bracket Bolt
    (3 Req'd) 82 18827 Noise Filter Condenser 83 — Ignition Coil Mounting Bolt (4 Req'd) 84 12259 Spark Plug Wire Set 85 12029 Ignition Coil 86 12043 Ignition Coil Mounting Bracket A — Tighten to 5-12 Nm (4-9 Lb-Ft) B — Tighten to 5-7 Nm (3-5 Lb-Ft) C — Tighten to 21-26 Nm (16-19 Lb-Ft) D — Tighten to 2-10 Nm (1.5-7 Lb-Ft) E — Tighten to 8-13 Nm (6-9 Lb-Ft) F — Tighten to 40-55 Nm (30-41 Lb-Ft) G — Tighten to 16-20 Nm (12-15 Lb-Ft) H — Tighten to 20-30 Nm (15-22 Lb-Ft) I — Tighten to 8-10 Nm (6-8 Lb-Ft) J — Tighten to 8-11 Nm (6-9 Lb-Ft) K — Tighten to 23-30 Nm (17-22 Lb-Ft) L — Tighten to 20-40 Nm (15-30 Lb-Ft) M — Tighten to 4.5-7 Nm (3-5 Lb-Ft) N — Tighten to 18-26 Nm (13-19 Lb-Ft)

    Feb 24, 2009 | 1995 Ford Escort

    1 Answer

    What is the valve cover torque sequence for a 2000 nissan altima


    No spec for torque. Bolts have shoulders. Replace gasket. Tighten the 2 center nuts first and just tighten the rest until they stop. You can tighten one and jump across the valve cover and do the other, but not necessary.

    Sep 27, 2008 | 2000 Nissan Altima

    Not finding what you are looking for?
    2001 Suzuki Grand Vitara Logo

    Related Topics:

    15 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Suzuki Experts

    yadayada
    yadayada

    Level 3 Expert

    75005 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Boyet Soriano
    Boyet Soriano

    Level 2 Expert

    293 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...