Question about Cars & Trucks
The "traction active" light keeps coming on, usually when I am turning the steering wheel.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
its probably a wheel speed sensor or " " harness. if you replace your hub assembly it will take care of the problem. a new hub will run you between $100-$130. its an easy fix if you have a little mechanical knowledge. i dont know what labor would cost but if you know how to change your brakes you can figur it out.
Posted on Jan 22, 2009
SOURCE: 2006 Monte Carlo
Here's how to override the shift lock on a 2006 Monte Carlo. First, remove the top of the shift console by pulling up on the plastic piece directly in front of the hinged cover. This is the piece that has the cup holders molded into it and it is held in place by 4 clips (i.e. it will pop back into place with no tools).
Next, shine a flashlight down into the console to the right of where the shift lever passes through (passenger's side). You'll see a wiring clip with 4 or 5 wires going into it. Directly behind this clip you can see a metal shaft with a flared top that looks like a button. This is the shift lock override button. Reach in behind the wiring clip with your right hand and press this button in. With the engine running, hold the button in with your right hand, press on the brake, and shift out of park with your left hand.
Now you can drive the car to your mechanic (or to your own garage) to find out why the shift lock solenoid is not working. On mine it was obvious. A wire going into that clip near the override button came loose and there was no power to the shift lock solenoid. I removed the clip, reattached the wire, and replaced the clip. Problem solved, fixed for free!
Posted on Feb 21, 2009
Get the codes.This will help in getting to the root of the problem.If you want you can jack the car up and check the scraping noise in the front tires.You could have a bad hub bearing.Getting the codes will help determine what side.
Posted on Nov 24, 2009
Tips for a great answer:
Dec 21, 2011 | 1983 Chevrolet Monte Carlo
Jun 19, 2011 | 2004 Chevrolet Monte Carlo
Feb 28, 2011 | 2003 Chevrolet Monte Carlo
Sep 14, 2010 | 2003 Chevrolet Monte Carlo
Apr 20, 2010 | 2007 Chevrolet Monte Carlo
Jul 05, 2009 | 2003 Chevrolet Impala
Jun 28, 2009 | 2001 Chevrolet Monte Carlo
Dec 09, 2008 | 2001 Chevrolet Monte Carlo
17 people viewed this question
Usually answered in minutes!