Question about Cars & Trucks

Open Question

Mf 235 wiring diagram starter solenoid

Can someone email me a copy of starter solenoid wiring diagram

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
keemo68
  • 1263 Answers

SOURCE: WIRING DIAGRAM FOR 1984 AMC EAGLE

well you have several options you can go to a dealship and have them copy the diagram for you(i do this all the time) or you can purchase a repair manual at Napa or Oreilly's for around 20 bucks. it has diagrams and schematics in it. it also has alot of instructions in it so you can do repairs yourself. By the way i'm surprised that the mechanic doesn't have these diagrams himself. I was wandering why it won't start after you changed the plugs and wires could it be that maybe the firing order is wrong. i've done that myself a time or 2. double check the the plug wires to make sure they are in the right spot. if the problem is it won't crank. chances are you have a loose ground. please rate this..thanks

Posted on Sep 05, 2008

Ad
  • 2 Answers

SOURCE: solenoid wiring

there is a larger wire and a smaller one that goes to the bigger bolt on it and it should be a red smaller wire that goes on the smaller one if u want email me at agj113@hotmail.com

Posted on Oct 18, 2008

warlock61
  • 659 Answers

SOURCE: 1983 Lincoln Continental/Mark VI STARTER SOLENOID WIRING DIAGRAM NEEDED.

the battery cable should be on one post and the fusible links should be on the same post. the other post should be the starter cable only

Posted on Dec 29, 2008

  • 114 Answers

SOURCE: Need a wiring diagram for a 1969 Ford F250.

there should be a slot for each wire on back of ignition play with them till you get it right cant hurt anything

Posted on Jan 14, 2010

ramp84
  • 57 Answers

SOURCE: i changed the solenoid in my 97 ford explorer and

4fe191b.gif

this is the wiring of the basic starter motor , it may have small diffences but the logic is there...

hope this one helps.... :)

Posted on Mar 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1988 Econoline Van. Where can I get a diagram of starter solenoid to starter wiring?


Here is a diagram for the wiring, though it isn't an actual picture. http://repairguide.autozone.com/znetrgs/repair_guide_content/en_us/images/0900c152/80/07/c0/bd/large/0900c1528007c0bd.gif

Trace the wires from the battery to the solenoid, then from the solenoid to the starter.

Dec 26, 2015 | Ford E-150 Cars & Trucks

1 Answer

I have a 2002 Pontiac gran prix. Power to lights,radio- but will not make any sound or attempt to start when turning key. Smells like burnt wires under hood?


I would check the starter relay/fuse and wiring to the starter. With the key in the crank position (someone holding it there) see if power makes it to the starter solenoid or the relay . BBB Industries have wiring diagrams online under Technical at no charge.

Jul 23, 2015 | Pontiac Cars & Trucks

1 Answer

Drove voyager to store turned it off an went to start it 20 min later an it wouldn't turn over. what would cause that?


You mean it won't even crank over? No starter action? If so, possibly a bad starter or starter solenoid (mounted on the starter).

If you have a voltmeter or test light, check for power on the solenoid's small wire connection, while someone holds the key in start. If it has power, likely the starter or solenoid is bad. If no power to the solenoid in start, the problem is between the ignition switch and the solenoid. You would need a wiring diagram of the start circuit for your vehicle to find the problem.

Turning the key to on, does the security light go out after a few seconds? If it stays on, you may have a problem with the security system.

If the engine cranks and won't start, check for a spark or gas problem.

Mar 11, 2015 | Cars & Trucks

1 Answer

On a jhon deer gt 235 whin i turn the key onto run pos. The moter starts turning over with the key not even in start pos.


possible faulty switch or crossed wires at the switch or wrong wire to the starter solenoid should go to the coil.

Feb 09, 2015 | Cars & Trucks

1 Answer

1990 ford bronco II solenoid diagram


Not sure what you are saying the problem is.
You have a red wire on the solenoid that goes to the battery and a 50amp fuse. The red and lite blue wire comes from the key switch.
Then you have a black wire that goes from the solenoid down to the starter to energize it. You have a large red wire on the starter coming from the battery to power it.


2_8_2013_9_17_52_pm.gif

Feb 08, 2013 | Cars & Trucks

1 Answer

I need to see if someone can send me a wire diagram for a 1985 ford f150 truck for the solenoid on the fire wall to the battery to the starter


battery cable goeas to the right side of the solenoid, starter cable to the other, and ignition wire goes on the left small stud sticking out of the front of the solenoid

Dec 25, 2011 | 1985 Ford F150

1 Answer

I have a 95 chevy lumina 3.1 liter car. When I turn the key, the all the light work but nothing happens when turning the key to the start position. The battery, starter, and solenoid are all fine. I...


There is a fuse from the ignition switch. There is also a fusible link. Below is a wiring diagram that you can look at and it has the wire colors as well. This I hope will help you narrow down your power loss to the solenoid. If you need anymore wiring diagrams for your vehicle I have them all and you are free to email me at csautomotivecars@att.net with what you need. No cost, Being nice cause it's Sunday....LOL Anyway, I hope this helps you and good luck. Here's your diagram


clifford224_116.gif

Apr 03, 2011 | 1995 Chevrolet Lumina

1 Answer

Subaru ea81 starter solenoid wiring diagram


Some starter solenoids are mounted on the fender near the battery and some are on the starter itself.

Typically the ones mounted on the fender have two larger posts and one smaller post. For the larger posts: One connects strait to the positive post on the battery. The other connects strait to the starter. The smaller post connects to the neutral safety switch which connects to the start position of the ignition switch. Here is a diagram. Make sure the solenoid is grounded good.

For the solenoid that is mounted on the starter: Connect the positive post of the battery to the large post on the starter. Connect smaller neutral safety switch/ignition switch wire to the smaller post.


Here is a diagram if you have both solenoids

Don't forget to hook backup any other wires that were hooked to the positive side of battery/solenoid like alternator wire etc.

Sep 11, 2009 | 1987 Subaru Brat

1 Answer

Solenoid wiring


there is a larger wire and a smaller one that goes to the bigger bolt on it and it should be a red smaller wire that goes on the smaller one if u want email me at agj113@hotmail.com

Jul 23, 2008 | 1986 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...