Question about Nissan Altima
The car runs fine pulls like a train, start first time But judders at idle .had the injecters checked and compresion all good, still juddering
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
These type of engines have direct rail injection so each cylinder has an injector. The problem sounds like the engine is only running on 3 cylinders (or less). It could be a faulty injector. Are you losing coolant? Is it overheating? Is there steam or excessive smoke coming out of the exhaust tail pipe?
Posted on Apr 08, 2009
I have 2 meganes im working on at the moment both have the same problem. the electrical falt light is on coz the pipe has snapped (or come off) under the bonnet on the passangers side close to the window (theres a black box about 2 inch wide the pipe connects underneath). if I reconect the pipe and grab the engien with both hands it wobbles and the pipe pulls off. I suspect this is coz one (or all) the engien mountings are shagged. and this will be the cause of the juddering when driveing in first and second gears. solutions iv have come across for juddering involve changeing the coil pack but thats nothing to do with the problem my 2 cars have as one of them has new coils. they are 1.6 petrol, p reg and s reg
Posted on Mar 04, 2010
Tips for a great answer:
Sep 01, 2016 | Jeep Cherokee Cars & Trucks
Jul 21, 2016 | Kia Ceed Cars & Trucks
Dec 16, 2014 | Volkswagen Golf Cars & Trucks
Apr 03, 2013 | 2007 Citroen Xsara Picasso
The Engine and Automatic Transmission (not applicable to manual transmissions) in this vehicles drive train are fully electronically controlled by a computer called the PCM and TCM (Power Train Control Module, Transmission Control Module). When a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM. Also always check fuel pressure for correct spec for your make and engine type.
Sep 06, 2012 | Cars & Trucks
May 29, 2017 | 2003 Renault Megane
Apr 08, 2009 | 2005 Renault 181
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: