Question about 2003 Chevrolet Silverado 2500HD
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This is a classic example of turn signal switch failure. On GM vehicles with a multi-function turn signal switch and combination stop/turn/tail lights (all rear lights are behind red colored lenses except for back-up lights) The brake light power is routed through the turn signal switch. This makes it possible for the right rear light to function as a stop light while the left rear turn signal flashes, and vice-versa. When the contacts fail to remain constant the brake lights, and turn signals can become intermittent. The proof that the brake light switch is functioning correctly is that the high center (cyclops) brake light functions properly. Wiring integrity is verified if you can prove that turn signals operate, but that can still be intermittent with this complaint, BUT if you use your hazard switch to turn on all the signals at once, you can verify wiring integrity. This is because the turn signal, and the brake light use the same circuit, and bulb filament in the rear lighting assembly. If any Hazard lights fail to function, check bulbs first, then retest. If all Hazrd light flash correctly and reliably, bulbs, sockets, and wiring have proven integrity, and the turn signal switch is the remaining component in the system which needs to be tested. Unfortunately, this switch requires disassembly of the steering column for service, testing or replacement. If you have never disassembled, and successfully reassembled a GM tilt steering column, I would reccommend professional assistance.
Posted on Nov 01, 2008
I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!
Posted on Oct 11, 2009
I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare
Posted on Jun 22, 2010
Tips for a great answer:
Mar 01, 2015 | Cars & Trucks
Feb 25, 2014 | GMC Cars & Trucks
Nov 28, 2012 | Cars & Trucks
May 14, 2011 | Chevrolet S 10 Cars & Trucks
Feb 10, 2011 | 2004 Mazda 6
Jun 22, 2010 | 2003 Chevrolet Tahoe
Feb 01, 2010 | 2003 Chevrolet Silverado 1500
Apr 05, 2009 | 2004 Chevrolet Silverado
Feb 26, 2009 | Chevrolet 1500 Cars & Trucks
Jan 09, 2009 | 2004 Mazda 3
Jan 29, 2016 | 2003 Chevrolet Silverado 2500HD
18 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: