Question about Honda Civic
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the cover just pulls off and disconnect breather hose as u lift it.there is about 15 screws to remove then the cover opens
Posted on Jul 12, 2009
I have changed a few cylinder heads under warranty for this type of problem. The exhaust valve guides wear, this causes the exhaust valve to seat badly, giving low compression. if one cylinder compresion reading is more than about 50 psi below the others, then this warrants head removal. It is quite a job, due to the fact that the camshft id chain driven. If you are up for it then once the head is removed, poor liquid into the exhaust ports and see if it leaks out through any of the exhaust valves.
Posted on Jul 23, 2009
Had exactly the same problem, completely baffled us until we discovered that the it was the oil pressure switch. We had already replaced it with a new one and then that didnt fix it so we fitted a new oil pump, but as soon as it was revved over 3000 revs the oil light came on. It turns out that there is actually a choice of 2 oil pressure switches for this car (1999 1.4 polo) one works only low pressure (black cap) and is the wrong one, the other works on a higher racio (green cap) its the high pressure one you need. If the oil light was on at tick over or below 3000 revs then its the lower oil pressure switch needed, above 3000 its the higher one. The parts people insisted there was only one, but there is definately a choice of 2 and it fixed ours instantly.
If it was an older model they actually have 2 switches on the car itself and one is a high pressure and one is a low pressure (just incase anyone needed to know)
Posted on Jul 24, 2009
Crankshaft sensor is located on the right side of the cylinder block behind or under the starter. It is fitted into the rear crankshaft oil seal hausing
Posted on Sep 12, 2010
Tips for a great answer:
Jun 12, 2017 | Cars & Trucks
Feb 20, 2015 | 2014 Volkswagen Passat
Mar 18, 2013 | Volkswagen Polo Cars & Trucks
Aug 22, 2012 | Volkswagen Polo Cars & Trucks
Sep 12, 2010 | 2002 Volkswagen Passat
May 19, 2010 | 1989 Volkswagen Golf
Mar 15, 2009 | 1994 Volkswagen Jetta
Sep 06, 2008 | 1992 Volkswagen Fox
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: