Question about Citroen Cars & Trucks

Open Question

Fill up water radiator

Top up water on citreon c1

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: water lose from the raditor on a citreon c1

Hi Dennis, If you're sure that the coolant is leaking from the radiator, replace it. If the cooling system is leaking somewhere else, have the cooling system inspected by asking for a cooling system pressure check. After locating the source of the problem attend as required. Areas of interest are 1) The radiator. 2) Radiator pressure cap. 3) Broken or cracked hoses or leakages from where each fits. 4) Water pump 5) Core plugs fitted into engine block and cylinder head. 6) Cabin climate system. (Radiator inside cabin of vehicle) Keep me informed as to your progress. Regards John

Posted on Dec 09, 2012

Ad
  • 2 Answers

SOURCE: Got a citreon c1 had injectors reseated , now car wont do anymore than 45mph , struggles to pull off in first gear , help

Check spark plugs and wires.

Posted on Oct 31, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

HOW TO FLUSH AND RENEW COOLANT?


if the thermostat is in the head at the top radiator hose , remove it an fill the cooling system until the water is at that point --refit the thermostat and continue filling
make sure that the heater is turned on so that any air is moved out of the system

May 30, 2016 | Cars & Trucks

1 Answer

How do I do a proper coolant flush and clean on a 05 Pontiac Montana SV6?


Drain radiator, remove thermostat reconnect housing, fill radiator halfway with water add radiator flush it's by Preston fill up with water start engine run for 20 minutes , drain radiator replace thermostat fill radiator with 50/50 mixture of antifreeze and water run engine and top off radiator as needed

Sep 30, 2015 | Pontiac Cars & Trucks

1 Answer

Replaced thermostat water pump overheating seems to have no backflow thru top radaitor hose


The engine gets cool water from the lower hose. And dumps hot water back in the radiator thru the top hose.

The water won't come your the engine until the thermostat reaches the appropriate temp.

After the thermostat opens and the water level drops in the radiator you can fill the radiator.

May 05, 2015 | Cars & Trucks

1 Answer

How do i change the radiator fluid?


Most radiators have a drain plug on the bottom tank the engine block also has a drain plug . Remove the radiator cap ,open both drains ,let all the coolant run out, if there is no radiator plug remove the lower hose , remove the heater demister hoses, with the heater control on hot flush out all the coolant from the heater radiator. with a garden hose, till the water runs clean, tighten the radiator plug or re fit the hose,put a garden hose into the radiator and flush out till the water at the block plug runs clean ,refit the heater hoses, refit the block plug, fill the radiator from the hose leave the cap off , If it has a overflow tank clean and flush it. start and run engine for 5 minutes top up radiator if needed . stop engine and drain out all water. most important that all old coolant is drained out, only buy the best coolant you can . If you make up your own use only distilled water. keep some to top up with never mix with another brand. Fill radiator with coolant top up over flow tank, run engine top up coolant as needed, refit radiator cap run for another 10 minutes check for leaks,

Oct 14, 2014 | 2006 Chevrolet Trailblazer

1 Answer

How to remove & reft condecing radiator on a citreon C5


Yes more than one special tool. System should be pumped down and recovered then replace condenser then vacuum system and reinstall freon

Sep 02, 2014 | Cars & Trucks

1 Answer

Water lose from the raditor on a citreon c1


Hi Dennis, If you're sure that the coolant is leaking from the radiator, replace it. If the cooling system is leaking somewhere else, have the cooling system inspected by asking for a cooling system pressure check. After locating the source of the problem attend as required. Areas of interest are 1) The radiator. 2) Radiator pressure cap. 3) Broken or cracked hoses or leakages from where each fits. 4) Water pump 5) Core plugs fitted into engine block and cylinder head. 6) Cabin climate system. (Radiator inside cabin of vehicle) Keep me informed as to your progress. Regards John

Dec 09, 2012 | Cars & Trucks

1 Answer

Where to find water temperature sensor on citreon dispatch 2002


The sensor will be near the engines thermostat housing if not in it the housing. To find that just follow the upper radiator hose to the engine

Jun 21, 2012 | Cars & Trucks

1 Answer

Where do I put water in for radiator ?


When engine is cool, take off radiator cap, and fill radiator. Then fill the coolant recovery container to halfway between the full cold mark and the full hot mark. Start engine (with radiator cap still off) and wait for the thermostat to open (upper radiator hose will get hot). Shut off engine, top up radiator, and put the radiator cap on. Fill the coolant recovery tank to the full hot mark.
You should mix the water and anti-freeze in a 50/50 mix before putting it in the car, you know. Cheers.

May 14, 2012 | 2001 Citroen Xsara Picasso

1 Answer

1999 astrovan heat system


check your engine coolant, sounds like it is low.

With the vehicle off and engine cold, take the radiator cap off. If the water level isnt at the top of the radiator neck and/or the adjacent plastic bottle doesn't have any coolant in it...

With the radiator cap off, start the engine and let it warm up. Completely fill the radiator to the top of the radiator neck and fill the plastic bottle to the "fill line" inscribed on the bottle...both with a 50% water, 50% coolant solution.

install the radiator cap and after a minute or so check your heat in the passenger cabin...hope it works well now.

Dec 23, 2008 | 1999 Chevrolet Astro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citroen Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you a Citroen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...