Question about 2001 Ford Explorer Sport Trac
While under my truck I found a rubber line that has been rubbed into it looks like some kind of transmission line for my 4 wheel drive. I see where it goes to the rear but not towards the front?
It may be a vacuum line so look for a hose from the manifold somewhere.
Posted on Feb 09, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I have recently had this problem with a customer. It seems the 4x4 low will only engage in neutral with the brake applied. And also check fuse. Then select drive and you will feel it lock in. Don't "goose" the fuel when attempting this.
Posted on Jan 14, 2009
sounds like its stuck.this was never a good system. if you have the owners manual follow it to a T. ussually if you find a dirt lot engage the 4x4 run it for a few then shut it off. then back up ten to twenty feet this will set things right
Posted on Oct 03, 2009
Today and over the weekend .I too had the same problem. Took it to the dealer and they tested everything and could not find the problem. Did vac test on the lines, Test drove it with code tester to see if there was any problems . Checked the hubs... They replaced the IWE solenold. Just hope that is the fix and it didn;t damage anything else... Thanks for the above info!
Posted on Mar 02, 2010
Tips for a great answer:
Apr 23, 2014 | 1999 Chevrolet Silverado 1500
Jul 05, 2017 | Cars & Trucks
Jul 25, 2012 | 2000 Isuzu Trooper
Jan 16, 2011 | 2002 Volkswagen Passat
Oct 27, 2009 | 2000 Ford Explorer
Oct 25, 2009 | 1994 Buick Regal Gran Sport
Oct 05, 2009 | 1989 Chevrolet S-10 Blazer
Jul 03, 2009 | 2002 GMC Envoy XL
Dec 01, 2008 | 2002 GMC Yukon XL
Sep 03, 2008 | 1991 Jeep Wrangler
Dec 13, 2016 | 2001 Ford Explorer Sport Trac
58 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: