Question about AMC Cars & Trucks
No reverse. Everything works weell.
Posted by Anonymous on
You'll have to go to GM for this diagram, but sounds like it's just dirt plugged the movement of fluid to reverse clutch pack. Since Google is your friend, type in "fluid path diagram for a GM TH400 transmission" and see what comes up.
Posted on Nov 06, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you are llokin at a late 60's Early 70's Nova and transmission set up. There is no wireing on transmissions. Wireing for that vintage cars were on either on the steering column under dash for column shifters. on in floor console for floor shifters.
Posted on Oct 25, 2009
Tips for a great answer:
Mar 22, 2018 | Cars & Trucks
Feb 25, 2018 | Cars & Trucks
Oct 27, 2016 | 1993 Chevrolet K1500
Feb 10, 2015 | GMC Cars & Trucks
Check the fluid level. The first thing to check if you suspect that the transmission is acting up is the automatic transmission fluid (ATF) level in the transmission itself. The dipstick on the TH400 can be found inside the engine bay, on the passenger side toward the firewall (opposite the radiator). Pull the handle attached to the dipstick, which will remove it from the dipstick tube. Clean any fluid off and put it back into place, making sure that it seats all the way. Then remove it again and look at the tip of the stick. There are level indicators there, which will tell you if the transmission is low on ATF.
Check the linkages. The linkages that are connected to the shift lever can get out of alignment at times, causing sloppy or difficult shifter response. Look for abnormalities such as bent or broken parts, loose attachment points, or blockages that would prevent smooth shifting.
Change the filter. Unbolt all 13 transmission pan bolts (on the bottom of the TH400) and remove the pan. The filter is found in this area of the transmission. Filter kits, which include the filter and a new pan gasket, can be found at any auto parts store. Replace the filter and fill the transmission with new ATF (the TH400 requires six quarts). Do not put the bolts back on too tightly, as the gasket can become damaged. Six to 8 foot-pounds should be plenty. If no torque-wrench is available, just put them on as tight as you can by hand, and then turn them 1/2 revolution.
Inspect the cooler lines. The number-one killer of automatic transmissions is heat. If the cooler lines that come from the radiator are damaged or leaking, it might be necessary to replace them. These items can also be found at the local parts store.
Apr 05, 2013 | Cars & Trucks
Oct 04, 2011 | 1987 Chevrolet R10
Aug 20, 2011 | GMC Sierra 2500HD Cars & Trucks
Jan 14, 2011 | 1989 GMC Sierra
Oct 25, 2009 | 2003 GMC Sierra 1500
88 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: