Question about 2001 Dodge Durango
The turn signals issue is most likely a fuse or the flasher. The blower issue is a bad blower motor resistor. As far as your running problem if you mean no start no lights, ect check your battery and alternator.
Posted on Dec 04, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sounds like you need a combo flasher assembly..located in fuse block inside vehicle under steering column..there may be a plastic cover under dash you have to remove to see fuse block..large black relay that plugs into fuse block..if you pick up a new one,you will see what it looks like..available at dodge dealer..combo flasher or drl/signal relay
Posted on Jun 14, 2009
replace the turn signal switch it self, mine did the same thing with the left turn signal, put in fuse and it will continue to flash... went to junk yard pulled one out of a 97 avenger just like mine, swapped them out and now it works fine. looked to be like some corrosion... to repace: 3 screws under columb, 2 screws on side of signal switch (black plastic side). unplug and replace
Posted on Jun 26, 2009
i had this problem 2 times the first time i took the flasher unit out it is kinda hard to get to it is on the back side of the fuse box i cleaned the contacts and put it back in. this last time i was able to take the flasher unit out and took it to the auto parts store to match up it is a five prong unit. put it in and have good blinkers ever since.
Posted on Aug 02, 2009
2000 Dodge Intrepid 2.7L SFI DOHC 6cyl
The Flasher is located front seating area, driver side, under left hand side of instrument panel between junction block and brake pedal.
Posted on Oct 30, 2009
Testimonial: "Yes, this was ver helpful. Thank You! PS. If that photo is the Lady that answered my question, OMG!!!!!!!!!!!!!!"
Tips for a great answer:
Jan 26, 2017 | 2002 Dodge Durango
Feb 13, 2014 | 2001 Dodge Durango
Turn on the Durango and check each of the four turn signals
to make sure that the bulbs are not burned out. If you find one that has gone
out, replace the bulb and retest the turn signals. When a bulb goes bad on this
circuit, the resulting operation can mimic a bad flasher or one that is
Locate the combination turn signal flasher and relay. It is
on the left end of the driver's dash. Open the access door and view the
collection of relays and fuses. At the left side of the mounting block is a
larger flasher and relay. This is the combination turn signal flasher and
the relay by placing you finger on the relay housing and activating the turn
signal. If you have found the right one, you should feel a clicking as the turn
signal blinks. Remove the relay, replace with the new relay and close the
Start the Durango and activate the turn signals to check that they each work. The light should turn on and should blink. Also, check the hazard lights to make sure they work.
Feb 11, 2012 | Dodge Ram 1500 Cars & Trucks
Jan 29, 2010 | 1999 Dodge Durango
Jan 09, 2009 | 2001 Dodge Durango
142 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: