Question about Nissan 350Z

2 Answers

Turn key wont crank - 350Z Nissan Cars & Trucks

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If your car is "Manual 5 speed" did you press the clutch all the way down? Is, and it doesn't start check switch off clutch pedal.

Posted on Apr 24, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Filmmaker:

    Uploaded 5 video answers.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 103 Answers

Possible issues: too many to list

Do you hear a clicking sound when you turn the key to "START"? If so, I'd say your battery is dead.

Do any of your gauge lights, head lights, radio, etc. work just fine? If so, I'd guess you have a bad ignition, bad coil, or bad starter.

Likely issues:
Dead battery
Bad coil
Bad ignition switch
Bad starter

Posted on Feb 08, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 jeep commandeer wont start, when I turn the key there is no sound, lights wont turn on and is that wasn't enough the key gets stuck in the ignition. any ideas?


it wont crank, no A/t car starts unless cranked first. (a key point)

fix head lights first. this is a feature in all cars.

that is SIMPLE and HOT all the time

they must work at all times and is the top way to diagnose

electric problems



you have a dead battery,.

only why remains.

i bet it cranks jumper cable started, call AAA or buy some cables.

or swap in a charged battery , or heck charge yours, buy a charger.

check fuses.

check battery lugs for green death?

check battery voltage. at 12.6vdc, if not charge the battery

if the battery continues to disgharge.

that is called phantom drains, or bad battery .

or the alternators is bad.(system)

once started the battery volts must be 13.3.to 15v, if not the charge system is bad ,(fuses, belts slipping and lots more possibles)

Sep 19, 2014 | 2009 Jeep Commander

1 Answer

Wont start


it wont start you mean it dosnt turn over no battery left or it cranks but no start clean all the keys and you should have a master key like a green one or blue with a m on it put this key in the ignition turn on the ignition without starting then turn it off and repeat with the other keys you have as well make sure its in the park position and start it after you have finish with all the keys if wont crank over try in neutral position no start fuses battery starter and so on to check after

Apr 10, 2014 | 2002 Kia Sedona

1 Answer

Truck wont start


sounds like the tumblers are worn out get a new or used ignition switch and replace.

Feb 17, 2013 | 2001 Chevrolet Silverado 2500

1 Answer

Car won't start without a jump but battery okay


wont crank or wont start.??
no car starts , if it cant crank. (unless push starter (M/T magic)
that is not a trans sensor its the PRN switch.
ill answer for, wont CRANK !
it wont crank even with a good battery (charged) or jump started.
1: bad start
2: bad wires to same.
so hot wire the starter small wire, the key start line is tiny.
cranks. , starter good, no crank starter bad or cables bad.
if it cranks hot wired, then the key line is dead.
easy, huh?

Feb 11, 2013 | Suzuki Forenza Cars & Trucks

2 Answers

Uplander wont start after changing battery


Wont turn over after replacing battery ??????? When you turn the key to the start position nothing happens ? Have to ask because won't turn over means something else to somebody else .
You have a engine cranks - no start or you have a no crank - no start .
Do the light's on the instrument cluster come on when you turn on the key ? Do the Headlamps work ?

Battery Disconnect or Replacement Problems

Jan 23, 2013 | 2008 Chevrolet Uplander

1 Answer

1998 chevy asto van wont crank or turn over


Turn the headlights on and watch them while the key is turned to start. If the lights go out, one of your cables or connections at battery or starter is not good. If lights dim a lot but stay on, possibly a bad starter, it needs testing. If lights aren't affected by cranking position, turn lights off, pull the small wire off the starter solenoid, hook up a test light to ground and to the solenoid wire. Light should come on when key is held in crank. If it does, likely a bad starter solenoid. If no light, then the start circuit from ignition switch to starter solenoid is not working. Check for power out of ignition switch on the start wire with key in crank, to begin with. If powered, switch is good, need to check if neutral safety switch is good, and then check or swap in a new starter relay.
Post back with any results.
Good luck.

Jan 17, 2013 | Nissan Altima Cars & Trucks

1 Answer

My 1995 nissan altima wont start, it has power but wont do anything when you turn the key. What could be the problem?


I am assuming that the starter will not crank over when you turn the key.It sounds like the starter solenoid is toast.Get a meter and see if there is power to the solenoid when you turn the key.It will be the smaller gauge wire .If you have power to the solenoid and you get no cranking then you will have to replace the starter(they are one unit)

Oct 03, 2010 | 1995 Nissan Altima

1 Answer

Car wont crank


Turn key on & off five times in a row. Wait 30 sec. & try again. If it doesn't start wait ten min. with key on & start car.

Sep 05, 2009 | 1998 Chevrolet Cavalier

1 Answer

Starter turns motor but crank pulley dont turn


The balancer and key needs to be replaced. It probably came loose and sheared the key. Check for damage to the crank key way too.

Jul 11, 2009 | 1991 Buick Park Avenue

1 Answer

1990 z wont start/ crank over Locked key in car so used a slim jim to open Now it wont crank over


Do you still have your OEM key and alarm remote control (if equipped)? If you're sure they work, open your hood and disconnect your battery for 10 minutes, connect it again and proceed to close all doors/hood as usual, arm & desarm the alarm and proceed to open the car with your key and turn it on. Did this help??

Jun 17, 2009 | 1990 Nissan 300ZX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...