Question about 2000 Audi A6

1 Answer

Audi a6 lights flash when doors lock

When I lock the car whether it be with the remote or by the door button all of the exterior lights and interior hazard light button start flashing within 5 to 10 minutes and won't stop until I unlock the car.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Audi Master
  • 733 Answers

CHECK THE ECU IT SI LOCATED AT THE RIGHT SIDE OF THE BOOT UNDER THE CARPET.THERE MIGHT BE WATER INSERTION!!CHECK AND LET ME KNOW

Posted on Mar 02, 2014

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
j_del
  • 1586 Answers

SOURCE: 2004 audi A6 flasher lights

You need a new hazard light switch - the relay for the hazards and turn signals is built in. It's $40 or so at a dealership to buy a new one.

Posted on Jun 01, 2009

  • 34 Answers

SOURCE: Audi A6 Anti Theft Central Locking Tantrums

Sounds like you are having problems with your built-in alarm system. Like most systems in your Audi, you can read the error codes stored in the controllers. It takes a tool normally only a dealer has (VW or Audi) or an adapter like the VAG Com. (Google it)

I also think you can disable the alarm system and just use the key.

Could the lock button on your remote be stuck? Use a different key/remote. (leaving the suspect key at home.) The keys/remotes can be taken apart....

Posted on Sep 14, 2009

fkuk
  • 311 Answers

SOURCE: Hazard light and interior lights problem on 2001 A3

the indicator lights flashing constantly might be a warning from the car that all the doors have not been closed properly

after writing this ^^ i think that the system that tells the car if the door is open or closed it damaged or broken
and needs replacing

try leaving all the doors open and lock the car do the indicator lights flash contantly?

you need to get a dianostics done but due to the reson that it is intermmitant the problem will not exist when you get to the garage

check all the sensors that tell the car if the door is open firstly

Posted on Dec 31, 2009

  • 2 Answers

SOURCE: hazard lights flashing and remote fobs not working

done all of the above had the reset done twice!!.....car still not being reliable?

Posted on Oct 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix my interior light problem?


Hi.your interior light switches is in your door locks so it can be that your drivers door lock is faulty or the wires in the door is broken the wires runs in a rubber like tube there where your door hinge is you have to open the tube and check wires if its ok the chances is good you are going to replace the lock.hope this helps

Jan 09, 2016 | 1999 Audi A6

1 Answer

Hi, my Audi A6 2006 won't lock the driver side door, when I press the lock button on my remote, even if I press the lock button once or twice!


Look at your MMI in there go to settings and check that your locking is to all doors in the MMI you can set what you like and what door to lock your Drivers door lock may be switched off just change it to on and it will work.

Mar 22, 2011 | 2006 Audi A6

3 Answers

Audi A6 Anti Theft Central Locking Tantrums


Sounds like you are having problems with your built-in alarm system. Like most systems in your Audi, you can read the error codes stored in the controllers. It takes a tool normally only a dealer has (VW or Audi) or an adapter like the VAG Com. (Google it)

I also think you can disable the alarm system and just use the key.

Could the lock button on your remote be stuck? Use a different key/remote. (leaving the suspect key at home.) The keys/remotes can be taken apart....

Sep 02, 2009 | 2000 Audi A6

1 Answer

Electric windows interior lights


check the rubber sleeve that has a wiring loom inside that runs from the door shut into the door ,sounds like the wires inside are damaged or the connector is corroded or loose

Jun 24, 2009 | 2000 Audi A6

1 Answer

Windows opens automatically


Try to find the door lock fuse and take it out. Then lock your doors manually

Jun 22, 2009 | 1999 Audi A6

4 Answers

Program a remote key for 03 A6


I have an A4 and did this to re-program my key:

1. used the key to start the car...then turned it off
2. put the key in the driver door (door closed)
3. pressed the lock button on the key fob once
4. turned the key to lock the door.

This is basically the steps in the owners manual, but the car must be started with the key first, and the key must be in the door lock before pressing the lock button.

Dec 10, 2008 | 2003 Audi A6

1 Answer

1997 venture keyless remote programming


SYSTEM OPERATION

System warning lamp located on top of the instrument panel
Press UNLOCK button once , turns on interior lamps and deactivates alarm (if fitted)
Press UNLOCK button twice w/in 5 seconds unlocks all doors, turns on interior lamp and deactivates alarm (if fitted)
To activate alarm system (if fitted):
Switch ignition OFF
Open driver's door
Press Lock button on remote
Close Driver door
warning lamp will flash when system is activated
Press remote power sliding door button will open sliding door (if fitted) only if unlocked first
Pressing remote panic button:
*Sounds horn intermittently
*Flashes exterior lamps
*Turns on interior lamps
**Pressing panic for the second time OR switching ignition ON deactivates alarm.


PROGRAMMING
Remobe key from ignition switch
Remove the "BCM PRGRM" fuse, from the fuse box
Close all doors
Turn ignition switch to the ACC position
With in 1 SECOND , turn the ignition switch to OFF then back to 'ACC'
(really, with in one second)
Open and close the driver's door. A chime will sound, indicating programming mode activated
Press and HOLD LOCK and UNLOCK SIMULTANEOUSLY untill a chime sounds 2 times ( about 15 seconds)
Repeat this exact procedure for all remotes to be programmed
Remove key from ignition
Refit 'BCM PRGRM' fuse.

4 REMOTES MAXIMUM CAN BE PROGRAMMED

Aug 24, 2008 | 2000 Chevrolet Venture

4 Answers

Program garage door opener


You must first erase what's in the memory.
1.) Simultaneously press both buttons 1 and 3 on the Audi's built-in remote. Hold them until the indicator light flashes (20 seconds or longer).
2.) Now hold your garage door remote close to the Audi remote.
3.) Simultaneously press and hold both your garage door remote button and the button you would like programmed. The indicator light will first flash slowly then rapidly.
4.) You may release both buttons once the light flashes rapidly.

Jul 01, 2008 | 2000 Audi A6

Not finding what you are looking for?
2000 Audi A6 Logo

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

yadayada
yadayada

Level 3 Expert

77202 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14394 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...