Question about Cars & Trucks
The EVAP Purge valve, on your vehicle, is located in the engine compartment. Yours is on the top of the front-right side (passenger side) of the engine. Just in case you need to know where the EVAP Vent valve/solenoid is located, it is underneath. It is tucked away at the rear part of the car, between the fuel-tank and the right-rear fender well. I hope that helps, good luck.
Posted on Mar 10, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i actually just did this a couple days ago, this takes about 20 minutes and a little bit of patience. When you pop your hood you will see a protective piece of plastic over the headlights/radiator, you firstly have to remove the plastic clips holding that piece then pull that piece of plastic off, once done u will see 2 bolts holding each headlight in place, i believe it is a 9/16 socket but if not just find the one that fits, remove the 4 bolts (2 for each headlight) and pull the headlight in an up and outwards manor. if you feel any resistance do not yank look at why it is catching and clear it, then it should just pop out (the headlight and the corner piece and clipped together so dont pull it too far out) then when the bulb is accessible pull the old bulb, put the new bulb in and voila place the headlight back into position, redo the 4 bolts holding the headlights and re-attach the plastic headlight/radiator cover. Enjoy the new lights
Posted on Dec 24, 2008
SOURCE: purge solenoid location
which vehicle are you actually looking for the purge solenoid on? you have 2 vehicles listed in your question. i'll answer both, lol
the locations are described as if you are looking at the engine from the front of the car with hood open.
on the blazer:
it is located on the left side of the intake manifold just under and behind the throttlebody. it is a canister looking device.
on the silverado:
it is located on the intake manifold on the left side in about the same spot as the blazer. providing the silverado has the 5.3 or 5.7 liter engine. if it also has the 4.3 then obviously it will be the same.
hope this helps!
Posted on Feb 17, 2009
Tips for a great answer:
Nov 26, 2016 | Mitsubishi Cars & Trucks
Dec 19, 2015 | 2000 Chevrolet Chevrolet Cavalier Base
Dec 19, 2015 | 2000 Chevrolet Impala
Jan 28, 2013 | 2001 Chevrolet Cavalier
Sep 02, 2011 | Chevrolet Cavalier Cars & Trucks
Aug 13, 2011 | 2004 Chevrolet Cavalier
Jul 02, 2011 | 2001 Chevrolet Blazer
Apr 22, 2010 | 2004 Chevrolet Cavalier
Mar 26, 2010 | 2001 Chevrolet Blazer
1,102 people viewed this question
Usually answered in minutes!