Question about 2002 Volkswagen Passat
The doors on the right side wont unlock. there is no problem with the doors on the left side(driver side). I have looked at the CCM box and it looks good dry and almost as new
PROBLEM AT THE LOCKS .CHECK IF U HEAR THE MOTORS AT THE DOORS WORKING.JUST LOCK AND UNLOCK AND CHECK .LET ME KNOW.
Posted on Mar 01, 2014
Testimonial: "No sound from motors in right side, just on left side"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Probably the lock actuator or the wiring to the lock up to and even being the master lock switch
Posted on Dec 16, 2009
Testimonial: "97F350diesel was very helpful in drilling down to the probable problem with my car and giving me a ballpark estimate."
Call me 1-336-835-2180 10am-11pm 7 days a week eastern. Ask for R.C. and I'll be glad to tell you what all it takes. If you look at the other doors that will open you will notice a lever on the side of the latch it will release the latch. with the door open flip the latch and open it so you can see how it works. Also you can take the door panel partly loose. You will not get all the screws out. You can get enough out to pull the door panel out and reach into the door, pull the rod from the door handle and open it. Once the door is open there is a torque bit screw in the end of the door that holds the outside door handle on take it out, pull the door handle out and you will find a pin out or broke in the door handle. Take a handle on the door that works so you can see the difference. To do the back door on a 4 door you have to take out the interior panel that the top holder of the seat belt goes through to get to the screws in the end of the door panel just to get the interior door panel off to reach in. You can replace the rool pin with a screw, but be sure it's tight because it will back itself out and you'll have to do it all again. Been there and done that. Ha Ha. If you need more than this just call. I'm in North Carolina.
Posted on Dec 27, 2009
SOURCE: 2001 passat fuse box diagram
It would be easier if you mention what device you're working with and I can tell you what number location it's fuse is at. Symbols are only there to confuse the hell out of you, although it's true purpose is to be recognized as a global standard. Now if you want to make it easier for yourself, buying a Bentley's repair manual is the only way to go. I hate to tell you that there are no free manuals you can down load, it cost money and someones time to upload a manual just to share it freely on the net.
Posted on Jul 24, 2010
Tips for a great answer:
Feb 11, 2014 | Volkswagen Cars & Trucks
Dec 31, 2009 | 2002 Volkswagen Passat
Nov 06, 2009 | 2006 Volkswagen Passat
Sep 11, 2009 | 2003 Volkswagen Passat
May 21, 2009 | 2003 Volkswagen Passat
May 18, 2009 | 2003 Volkswagen Passat
Dec 07, 2008 | 2006 Volkswagen Passat
62 people viewed this question
Usually answered in minutes!