Question about 1998 Ford Contour

Open Question

Audi 3.0l 2004 mark cam - 1998 Ford Contour

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing marks for 1994 audi 2.8 v-6


the "timing marks" on audi"s are on the cam sprockets. large holes on the lobes of the camshaft gears are supposed to face each other when cylinder 3 is at TDC the crankshaft has an arrow that needs to be aligned as well. see pics for reference
c5afa606-e7a0-4acf-aaa5-3184a05fa4a1.jpg

Dec 28, 2013 | 1993 Audi 90

1 Answer

Audi a4 1.8 can't start after top was overhauled is making a weird sound like backfiring the engine dont even move please help camshaft marks was done as well as pulleys and the pistons was also put on...


Back fire is only caused by intake valve being open when a spark plug fires on a cold engine.
Recheck timing marks of cams where the drive sprocket notch of each cam shaft aligns with the cam cap mark at the rear of the head.

It has been known for the crank sprocket to come loose on the crank nose and timing will be off if this is so.
.

Oct 23, 2013 | 2004 Audi A4

1 Answer

Timing OK?


You did it the right way. If you tried to make a full cam revolution you would have hit the pistons with the valves. Put the lower timing cover and crank pulley back on. If the cam marks are aligned right and the mark on the lower timing cover lines up with the mark on the crank pulley, you're good to go.

Mar 12, 2010 | 1999 Audi A4

1 Answer

Audi 2.5 tdi timing marks


timing marks are on the cam and crank gears behind the timing cover

Mar 03, 2010 | 2004 Audi A4

1 Answer

Timig belt marks for a 1984 Audi 5000 .l I see the mark on the cam shaft gear but don't see any marks it is to line up.


there usually is an arrow looking mark (or V shaped mark) above it on the housing.

Feb 28, 2010 | 1984 Audi 5000 S

2 Answers

What is a cam crank sensor on 2004 Audi A4


The "cam crank" sensor is the "reader" for position and speed of the camshaft. This sensor send informations to Engine Control Unit about camshaft position and speed. If the sensor is faulty engine stops!

Oct 23, 2009 | 2004 Audi A4

1 Answer

How do i set the timing for audi A6 2003


there are actually special tools the cam has no timing marks the tool only goes on one way and locks the cams in place and it is actually a long process but there is no way to do it without the cam lock

Aug 20, 2009 | 2003 Audi A6

1 Answer

1997AudiA6Quatro2.8L-aligning cam and crankshaft for timing belt


You must find the cam lock bar and crank lock pin to do this job properly, otherwise you can bend some valves and that becomes expensive..the front crank damper has a mark to line up with a mark on the timing cover for #1 TDC, but the cam lock bar is what aligns the cams into position. The crank lock pin is helpful but not 100% necessary...

Aug 15, 2009 | 1997 Audi A6

Not finding what you are looking for?
1998 Ford Contour Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...