Question about Cars & Trucks
Will not crankk over was then shot wiht ether n stopped voltage good at starter and relay maxi ffuse good ????
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This sounds like a connection problem. I would suggest cleaning your battery terminals and cables with a battery brush. If any corrosion is present, check in your cables at the cable ends to make sure the corrosion has not gone down into the cable itself. If it appears that it has, I would replace the cable or cables. After that make sure they are good and tight, give it a spin and see what happens. If it does not start, check for damage along both cables. Check all cables on the positive side all the way down to the starter and make sure the ground cable is good and that it's connection to the frame, or it's grounding point, are tight and clean. I hope this cures your problem, but if not, let me know and we'll go from there.
If your cables are heavily corroded and you can't get new cables, you can try a mixture of water and baking soda to pour on and into the cables, this will eat away most of the corrosion.
Posted on Feb 12, 2009
Even though I bought the vehicle new, there was an aftermarket security system installed. The system had a bad diode, so i removed the system and reconnected the factory wires.
Posted on Mar 30, 2009
Check the Starter Solenoid mounted near the battery.Check it out in the dark...have someone try to start it and see if it sparks at the solenoid.connections may be loose.Also check/wiggle wiring harness to starter.
Posted on Apr 19, 2009
pull starter back off but do not disconnect cables, then try key again, if starter spins use a large standard screwdriver to turn the flywheel through the starter mounting hole,if it doesnt move u have motor trouble
Posted on Oct 03, 2009
if its standard check that the clutch relay is good. check battery voltage and connections first then check for voltage at the stater.try the starter manually with the key on and jump the terminals on the starter with a screwdriver it should turnover
Posted on Oct 04, 2009
Tips for a great answer:
Oct 05, 2016 | 2008 Dodge Ram Pickup 2500
on Dec 20, 2016 | Cars & Trucks
Sep 02, 2015 | Cars & Trucks
Aug 06, 2014 | Volvo 780 Cars & Trucks
Dec 21, 2013 | Cars & Trucks
Oct 03, 2013 | Cars & Trucks
Feb 16, 2010 | 2005 Volvo XC90
Oct 04, 2009 | 2001 Dodge Ram 2500 Truck
Jun 08, 2009 | 2005 Dodge Ram 3500
Nov 20, 2017 | Cars & Trucks
75 people viewed this question
Usually answered in minutes!