Question about Cars & Trucks

Open Question

How can one change transmission fluid of bt50 automatic mazda

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 142 Answers

SOURCE: transmission fluid change

More than likely, like most automatic transmissions, yours does not have an oil plug. You need to drop the transmission oil pan to drain the old oil... You need to buy a transmission filter/pan gasket kit. The filter is located on the bottom of the tranny. You will see it when you remove the pan. Replace the filter, thoroughly remove any traces of old gasket material, clean the mating surfaces, and reinstall the pan with the new gasket. Torque the pan bolts to the manufacturers spec (you should be able to get this where you buy the filter/gasket kit). Refill the transmission through the dipstick (Capacity for the Voyager is 4 quarts, make sure to use ATF Plus (Type 7176) for your particular tranny, NOT Dexron, Mercon, or generic automatic transmission fluid, Chrysler transmissions do not like any other kind and tend to fail quite quickly with the wrong fluid). Fill to the full cold level. Start the engine, move the shifter through all gear ranges, and put it back in park. Leave the engine running and refill to cold full. Drive the car for 5-10 minutes and, with the engine still running and the car in park, fill to Hot full. You should be ready to go!

Posted on Aug 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Problem starting my mazda bt50 3.0 turbo Diesel 2007. had new injectors 6 months ago


Hi I have a problem, to start my 2010 3 liter mazda bt50.
I change the fuel pump but still the problem didn't solve

Feb 22, 2011 | 2007 Mazda B Series

1 Answer

I have a 2005 Mazda RX-8. It is an automatic. I am getting slippage in the transmission when driving it. I would like to change the transmission fluid myself. I am curious as to whether there is a filter...


there is a filter and a gasket, just change it don't flush it if it has a lot of miles on the fluid it could brake some thing loose in side you tranny.

Jan 23, 2011 | 2005 Mazda RX-8

2 Answers

Is there a filtrer ia the automatic transmission?


If it's automatic trans - Yes If it's a stick - NO

Jan 04, 2011 | 2003 Mazda Protege

1 Answer

Ihave a 1997 mazda protege and after having it for a week I noticed the transmission will slip when going into 3rd gear (automatic transsion) the fuid is brown and I was worried about really messing things...


.One of the most common causes of a slipping transmission is a low automatic transmission fluid level, also a dirty and/or clogged automatic transmission filter can impede the normal flow of automatic transmission fluid throughout an automatic transmission and cause the transmission to slip. Adequate, unobstructed transmission fluid flow is necessary for the optimal operation and function of an automatic transmission, including the function of the transmission bands and gears, two transmission components that routinely cause transmission slippage.Another cause would be faulty torque converter action and maladjusted transmission band.

Jan 01, 2011 | 1997 Mazda Protege

3 Answers

My daughter has a Mazda 3 hatchback with automatic


Yep.They are trying to rip you off.Its not due untill after 20,000 miles.At the same time the auto trans filter should be done.Stick it up them.Hope this helps

Oct 24, 2009 | 2008 Mazda Mazda3 Hatchback

1 Answer

What fluid Mazda B3000 automatic


we use mercon v in the trans of the b3 and b4000 trucks. Mazda recommends that the trans be serviced every 30 thousand miles this will greatly extend the life of the trans

Jul 10, 2009 | 2007 Mazda B3000

2 Answers

Does a mazda 323f 2001 model need gearbox oil change after some milage or is it a sealed unit?


Automatic and standard transmission needs fluid change every 24 months. On automatic transmissions, the gasket needs to be changed as well as the filter. On standard transmission there is a drain plug that can be loosened up, and refilled through the refill hole. Standard transmission use gear oil, while automatic transmission uses automatic transmission fluid.

Jul 02, 2009 | 1994 Mazda 323

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...