Question about Cars & Trucks

1 Answer

I have a 06 ford fusion I had a tire blow out on the freeway going 65 It was the front right tire and the fender well was removed previously to the blow put It ripped some wires including a black and yellow And a blue and white I think the blue and white is the horn since the horn dont work But after the blow out i had the car towed to my house and after i tried starting the car and nothing I tested the battery and it was bad so got a new battery and still didnt work I noticed i didnt hear the fuel pump so i checked the ineryia switch and it was tripped so i reset it and now car attempts to crank Tried started fluid and still wont start Could i of possibly flooded it while attempting to crank it so many times What else could be wrong Also full tank of gas

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 808 Answers

Hi,if you have flooded the engine put your foot down on the throttle peddle to the floor then tern the key and it will let more air through wich will dry the plugs out and it should start,dont pump the peddle just keep it to the floor,if its flooded it will work,all the best.

Posted on Mar 21, 2017


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Front brake rotor replacement 2008 ford fusion

loosen the lug nuts, Jack it up , take the tire off , remove the caliper an caliper mounting bracket , pull off rotor !

Oct 24, 2015 | 2008 Ford Fusion

1 Answer

I have an 06 ford fusion SEL with the 3 litre v6 and six speed automatic transmission. Its at 161000 miles currently. There is a loud rumbling nois coming from the front end. I had the tires, bearings and...

Sounds like it could be the CV joints, drive the car in reverse for a little and put steering on full lock, the noise will be a crunching sound coming from the front, if so then ist definitely the CV joint(constant velocity) joint, hope this helps

Jan 04, 2015 | 2006 Ford Fusion

1 Answer

Instructions how to change timing chain on 2006 Ford fusion

Do not see you doing that yourself

Be easier to drop the motor out the bottom,
or remove the fender, to even get to the front
of the motor,very,very expensive job, based on
labor time

Go to You Tube Video & look at a similar
motor taken apart or timing chain reinstall

You most likely have worn chain guides or
failed Cam Actuators (VVT)

You have not stated what if any problem has been actually
diagnosed & how it was done!

Apr 23, 2014 | 2006 Ford Fusion

1 Answer

I have a 06 ford fusion I had a tire blow out on the freeway going 65 It was the front right tire and the fender well was removed previously to the blow put It ripped some wires including a black and...

yeah you could of flooded the tank but it could be that or the two wires that go to your horn of the car could switched around also but to be safe about this i think you need to just get it checked at a car shop and see if there is nothing else that is wrong with the car and are you sure that the fuil pump is not out to but if so get that fixed and then try to start it ok

Feb 08, 2014 | Cars & Trucks

1 Answer

Replace spark plugs access to

for the back plugs you have to remove the cover in your van that looks like a dog house and for the front go through the fender wall you have to remove both front tires to go through the fender walls

Jul 12, 2012 | 1997 Ford Econoline

1 Answer

I have a ford fusion 06 and it sounds like a grinding rubbing sound and squeaking of the breaks coming from the right front tire! kind of like the break is sticking? i took the tire off and everything...

If you took the tire off and there is no evidence of major wear then you might have a steering knuckle bearing that's bad.They can also sound like the grinding and squealing like bad breaks.The steering knuckle is what everything is attached to.The bearing in the center of the steering knuckle for the axle shaft.

Mar 12, 2011 | 2006 Ford Fusion

1 Answer

Front end vibration on the freeway @65 and up???

first check your tires and make sure they are not low or have a bubble in them, then check your fluids ! Then your motor mounts!

Jan 10, 2011 | Ford Ranger Cars & Trucks

2 Answers

06 Ford Focus refill of 134A where is the inport located

please rate if this helps.

It is in the front passenger side wheel well. Remove the plastic fender liner (@ 7 screws) and you will see it. Remvoe tire first.

May 09, 2009 | 2000 Ford Focus

1 Answer

1990 ford tempo horn won't stop honking. need to know where it is so i can unplug it

You may find that you have a horn fuse if you do simply remove it other wise here it is.
The horn in my 1994 ford tempo is located behind the right front tire wheel well. (1) Remove the right front tire. (2)Remove the inside thick black cardboard protector(A lot of work)(3)Look up inside the fender. You will see 2 small horns.One marked high(h) and one marked low(l).
hope this helps....Good luck!

Dec 15, 2008 | 1990 Ford Tempo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14403 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides