Question about 2001 Honda Accord

1 Answer

10 amp Small light fuse passenger side keeps burning out

I am not a car expert but I can manage a few small tasks. I replaced the 10 amp fuse on the passenger side and 2 burned out in less than 2 minutes. Obviously something is grounding but I have absolutely no idea what??? Dash lights and rear running lights out. Nothing after market is installed and it has original honda radio. Please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 20,706 Answers

Its just electrics, and ohms laws..
if the right fuse is there, it burns out for one reason, a short.
(excessive current) and prevents fire, the battery can supply 500 amps
easy and you'd not want to short that, ever.
first thing, is to post the name of the fuse, they all have names.
rule 2, most fuses can have 20 loads, not just the named, load on fuse.
so, only schematic of the system shows ALL loads.
no named fuse, no joy, or post a photo to it with finger pointing, >>> here.

the car came with an opertators guide, in the glove box and all guides
name the fuses, if lost get one.
here it is for free.
http://justgivemethedamnmanual.com/honda/honda-accord-coupe-owners-manuals/

and once the name of fuse is know , the full scematic is
at alldata.com
DIY, discounted here..... (i make nothing saying that...)
http://www.scantool.net/software/alldata-diy-1-month-subscription.html

to find a short we use an ammeter, and a circuit breaker
to replace fuse that burns out.
then we drop loads off this buss until the short, goes byebye.
thats it.
if it dont go way, then the harness is shorted, (ask how to find if so)



Posted on Feb 08, 2014

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: 1991 Honda Accord brake light probelm.

Check the prones inside the connector that you plug into the brake light module. You may have to squeeze, wiggle, tilt each one to see which one is not connecting all that good. I know it may sound confusing. I tried to explain the best of I could.

Posted on Apr 29, 2009

  • 89 Answers

SOURCE: how to reset SRS light on a 2001 Honda civic EX

if the video dosent work go to www.vehix411.com free video instuctions will show you how to reset without a scanner / computer

Posted on Oct 20, 2009

  • 1810 Answers

SOURCE: 95 Honda Accord, fuse keeps blowing and no dash lights

sounds like a short
look at wires under dash
then look at te wires coming through the fire wall
check lighter too it might have a coin stuck in it as it will cause a short too

Posted on Jan 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why would only one out of 4 marker lights work?


you are right all marker lights come off of one fuse, inside instrument panel, number 29, a 10 amp fuse my manual does not give a lamp number, it has a chart, head lamps (high) lamp 9005 60 w type a, headlamp (low) 9006 51 w type b, front marker lamps 5w type d, for the rear it says to use a lamp 7443 21.5 w type d, I do not use these, I have special lights on mine, hope that it helps

Mar 28, 2015 | 2007 Scion tC

1 Answer

Blowing fuses


its shorted, that line feed.
it saved you from the FIRE. that would happen, so dont up the fuse side. or boom.

google how to find electrical shorts in cars.
we use a meter.
got one?

Dec 14, 2013 | 2000 Honda Odyssey

1 Answer

O2 daewoo lanos keeps blowing ecm fuse


The Ecm fuse is located in the passenger side footwell...take off the small cover there and you will its fuse number 5

Jul 29, 2012 | 2002 Daewoo Lanos

1 Answer

Is there a fuse on the compressor of a 2000 Grand Am? If so, then where should I look for it?


Yes there is a fuse, A small, red 10 amp fuse. Usually located under the hood, and possibly in the passenger side power distribution box.

Aug 23, 2011 | 1998 Pontiac Grand Am

2 Answers

No tail lights early morning or evening


The circuit board witch holds the tail light bulbs could be at fault,check the voltage to the tail lights when this happens,if there is none,replace the headlight switch.If there is voltage to the tail lights,replace the tail light assembelys

Jul 10, 2010 | 2000 Pontiac Montana

2 Answers

1999 buick century odometer light does not work


this is a common problem and the dash cluster must be removed and sent out for repair, cost is about $175 to replace the LED (Light emitting diode) display that has burned out, this is a faxtory defect as far as this expert is concerned, it is not a fuse problem.

Jun 13, 2010 | 1999 Buick Century

2 Answers

2000 C5 Corvette turn signals and running lights not working


EATHER YOU HAVE A BAD GROUND OR A BAD HEADLIGHT SWITCH

Mar 02, 2010 | 2000 Chevrolet Corvette

1 Answer

Passenger side head light not work, Battery drain


jay: There are two fuses for the headlights. make sure you have checked both. The fuses are located in the engine compartment in the black box and they are 15 amps each. When you say you checked the bulb, did you try another bulb in it's place? Did you check to make sure you have solid ground connections?

In terms of the electrical draw: The first thing I would check is the alternator. One way you can check sometimes if the draw is strong enough. Get a hacksaw blade or something similar in size and thickness. like a small metal ruler. With the battery connected and the key removed from the ignition, place the blade flat on the front of the alternator pulley. If it sticks or if you feel a small amount of magnetic pull, the alternator has a short and is creating the draw.
Outside of that you would need an amp meter which you could put between the battery cable and the battery terminal to measure the draw. From there you could start pulling fuses one by one until you notice a drop on the meter. Typically a few tenths of an amp draw is normal because you have certain components which use very small amounts of current to maintain memory such as your radio.
Let me know how you make out. I'll be more than willing to further assist you if you need it.

Apr 28, 2009 | 1992 Nissan Maxima

Not finding what you are looking for?
2001 Honda Accord Logo

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...