Question about 2011 Dodge Caliber Mainstreet
Left rear turn signal dosent work rapid flash whenon dash when you turn it on
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
check the main fuse box under the hood,also check that the left front turn signal to see if the bulb is blown,sometimes when only one bulb is working it can cause it to flash much quicker,also check all the wiring there could be a short circuit somewhere ,this can also cause this problem.....hope this helps.....cheers
Posted on Jul 27, 2010
.. Hi there.
This is a typical earth problem. Some of the lights use the same earth and when some of the earth points are not good, the power go through the other lights. That is why some lights go's faster, it's all about resistants. Check all the earth points in the light holders and under the dash and also between the battery, engine and body. Good luck.
Posted on Apr 25, 2011
Good job, and good joe to you for solvin it! Now you'll remember that's a common indicator of a burnt out bulb. For some reason I can't explain, that is how a bad bulb acts on the flasher unit - by more rapid clicking (breaking contact inside the flasher relay at a quicker rate). It seems both the front and rear signal lights have to be working for the normal flasher rate ...well good.
Posted on Aug 23, 2012
Tips for a great answer:
Apr 10, 2015 | 2001 Dodge Dakota
Mar 16, 2015 | 2009 Dodge Caliber
Aug 22, 2012 | Dodge Cars & Trucks
Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars
May 04, 2011 | Dodge Intrepid Cars & Trucks
Apr 25, 2011 | 2002 Dodge Durango
32 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: