Question about Chevrolet Monte Carlo

Open Question

Can't turn key ignition, steering wheel not locked, can't shift

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

freetek
  • 5568 Answers

SOURCE: A4 steering lock does not engage and car won't turn over

The steering locks don't necessarily engage when the key is removed, I always turn the wheel before exiting to engage it. There are several positions that will allow the pin to lock in but if between these, it may seem that it isn't locked.

Posted on Aug 23, 2008

flacooo1
  • 172 Answers

SOURCE: 1998 nissan altima gxe -ignition problem

Hi what is happening is that your turn off your car and left the wheels turned to one side and specially if your car is parke in a hill what you have to do is to force the steering wheel to the same direction of your wheels this will free up the ignition switch it is going to be hard let me tell you but it will work and this is why your shift don't work once you have the ignition switch free then your shift will work again

Posted on Apr 01, 2009

  • 2 Answers

SOURCE: Lock steering wheel...Key won't turn in the ignition

Make sure to push the brake firmly with you foot. I do this all the time.

Posted on May 28, 2009

  • 131 Answers

SOURCE: cannot unlock the steering wheel on oldsmobile intrigue 2001

is it the right key for that car? cause if not then that is the problem... if it is the right key, then you might have to replace the key cylinder cause you may have something broken in it...

Posted on Jun 14, 2009

  • 112 Answers

SOURCE: Steering wheel locked in place, key will not turn...

Very likely the steering thrust stored in the tires attempting to turn back is forcing excessive tension against the steering lock.

Try (very hard) to turn the steering wheel either direction while turning the key gently.

If that solves it you can avoid this by letting go of the steering after stopping to park, turn off the ignition slowly (engine off, pause, then key out). This will ensure that the steering wheel comes to rest prior to locking the column.

Posted on Jul 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My igntion is lock on my 2010 hyundai sonta and i have tried both keys


Are you able to turn the steering wheel any? It may only turn a little, but that should be enough. Try turning the steering wheel to the left and holding it there tightly while turning your ignition key. If it doesn't work, try turning the steering wheel to the right and holding it there tightly while turning the ignition key. If that doesn't work, try wiggling the steering wheel by turning it back and forth while trying to turn the ignition key. If it still doesn't allow the key to turn, try activating the shift lock release and shifting the car into neutral. Do this by prying open the small square plastic cover next to the shift lever. With the cover removed, apply the brake with your foot and insert a small screwdriver or bic pen into the hole. Push down and move the shift lever to neutral while holding the shift release down. Remove the pen/screwdriver and replace cover. Now try turning the ignition switch. That should work, but if it doesn't let me know and we'll go from there. a48afaae-b675-4190-9e1b-0a8be3ea56d9.png

Mar 18, 2014 | Hyundai Sonata Cars & Trucks

1 Answer

The ignition on a 1990 Toyota Corolla is locked, as well as steering wheel and gear shift. What can I do to unlock the ignition? The key will not turn, the steering wheel will not move and the gear shift...


try turning the steering wheel a bit. it may be the steering has the steering lock in a bind.
if that dont work wiggle key sideways and in and out a little then have lock cyl replaced

Mar 27, 2010 | 1990 Toyota Corolla

3 Answers

Steering wheel lock,key won't turn.


Are the wheels turned all the way left or right?
If so: insert the key in the ignition. and pull down hard on the steering goin in-the-same-direction that they are already turned. Turn the ignition ket at the same time.
If not: then you will need to take the steering column covers off and check on this mechanism which locks the wheel and the cylinder when the wheels are turned this way. it is located up adjacent the ignition key cylinder. There is a spring and a plastic mold piece inside this mechanism which may have failed.
Another possibilty is: Does your vaehicle have a Security System? Is the key you are using a security key?

Nov 25, 2009 | 2002 Dodge Durango

3 Answers

Cannot get key to turn in jeep. Have already driven it numerous times today, suddenly can't move steering wheel or gear shift and key will not turn. Help!


Try turning the steering wheel (hard) right and left while turning the key. Steering lock , and ignition lock work in conjunction with each other.

Nov 06, 2009 | 2004 Jeep Liberty

3 Answers

Key stuck, won't turn, won't shift...replace ignition switch?


Before you replace the switch try this. As you try to turn the key rock the steering wheel back and forth. The key may turn then, if so it was stuck due to pressure from the steering wheel lock. If it still doesn't turn yes the key and tumbler are bad.

Sep 07, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

Steering wheel locked, shift lever stuck in the park position, neither key will turn the ignition switch


turn ignition key on. now jiggle key gently while simultaneously gently rocking steering wheel. hopefully you will feel a release.

Aug 30, 2009 | 2000 Lincoln LS

1 Answer

Nissan Sentra 2008 will not start


First try turning the steering wheel and jiggling the key simultaneously. If this doesn't work, your problem could be caused by the link between the ignition lock and the switch. Have your ignition switch and your key tumbler assembly replaced. It's an 08. It's under warranty !

Apr 05, 2009 | 2008 Nissan Sentra

1 Answer

1998 nissan altima gxe -ignition problem


Hi what is happening is that your turn off your car and left the wheels turned to one side and specially if your car is parke in a hill what you have to do is to force the steering wheel to the same direction of your wheels this will free up the ignition switch it is going to be hard let me tell you but it will work and this is why your shift don't work once you have the ignition switch free then your shift will work again

Apr 01, 2009 | 1997 Nissan.5 Altima

1 Answer

92 accord - ignition / steering transmission locked


if the wheel locked when trying to turn the ignition, that is not uncommon. Just simply turn and hold the steering wheel the opposite way, then you will be able to turn the ignition on.

Jul 11, 2008 | 1992 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...