Question about 2000 Toyota Tundra

Open Question

How to fix p1130 air sensor for toyota tundra 2000

P1130 manufacture controlled fuel and air sensor for toyota tundra 2000

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: Toyota Avalon XLS, yr 2000, engine lights on

P0171 is a lean code. Open the hood, and locate the mass air flow sensor. Small black thingy in the intake tube between the air filter box and the engine, held in with 2 small screws. Remove the connector, remove the screws, and remove the sensor. Look into the sensor, you are going to see a couple of wires deep inside it. They will probabaly be "fuzzy" looking. Spray some brake cleaner on the wires until they are nice & clean. This will cure the P0171 code. Then check the air filter; replace it if it is dirty.

P1130 is an air-fuel sensor code, bank one, sensor one. More often than not, when we see this code, we replace the air-fuel sensor. Buy the replacement from you Toyota dealer, because the aftermarket sensors will not send the proper signal to the ECU, and you will be upset for having to buy a second sensor.

P0440 is a leak in the evaporative side of the fuel system; this looks after the fumes of the fuel in the tank. There are several reasons for seeing a P0440, like leaking vacuum lines, faulty fuel cap, rusty fuel filler tube at the cap, etc. This is kind of difficult to rectify without the proper equipment needed to diagnose what & where the actual leak is.
Hope this helps, please consider kind remarks regarding this solution. Thanks.

Posted on Sep 16, 2008

Ad
  • 373 Answers

SOURCE: 1998 camry, 4cyl. P0171, P1130 toruble codes.

Hi.. On your question the definition of the codes are:
P0171, System to lean ( Fuel trim)
P1130, Air / Fuel sensor circuit range ? performance malfuntion This code is exclusive california Emissions). Oxigen sensor Performance malfuntion.
The first step you need to do is Check the Oxigen ( O2 sensor)
Connections The front and the rear one.
Check the condition of the Air filter Replace if need.
Check Spark plug Replace if need.
Check Fuel condition, Replace fuel filter if need.
And Clear the Codes if averything is good.
If the code P1130 return Replace the Air fuel ratio sensor..

Ok.. I hope this help on your question. If need more info letme know.

Thankyou for use fixya...

Posted on Jul 26, 2009

  • 1071 Answers

SOURCE: trouble code meanings for 2000 toyota avalon

bank one is the bank closest to the firewall in the manifold but if you replace this one you should do the other or you will get a code for it not long from now because the new sensor will operate much better and faster

Posted on Jul 29, 2009

  • 1 Answer

SOURCE: trouble code meanings for 2000 toyota avalon

bank one of a 2000 Avalon is on the rear NOT the front of the engine compartment!!

Posted on Jul 31, 2009

  • 30 Answers

SOURCE: code p1130 p0171

P0171- mens the MAF sensor is dirty and needs cleaned. You can get MAF cleaner at your local auto parts store. The MAF is located in the air intake just after the air filter
P1130- is more than likely a result of the previous code. It is in regard to the feul/air mixture ratio. A dirty MAF can cause this code.
Also, if you are using an aftermarket oiled air filter, it would be the cause of the P0171 code.

Posted on Aug 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P1130 CODE FOR 2000 TOYOTA SIENNA


The air/fuel ratio sensor has gone bad (basically the O2 sensor). The code P1130 is Bank 1 Sensor 1.
Sensor 1 is before the catalytic converter coming off the exhaust manifold. Bank 1 is which ever side cylinder 1 is on your engine. In this case its a sideways engine and its closest to the firewall.

May 01, 2014 | 2000 Toyota Sienna

1 Answer

What does the code p1130 mean?


code p1130 refers to heated oxygen sensor--LH front--range/ performance malfunction===causes--wiring--oxygen sensor--air induction system--fuel pressure---injector/s ECM. Personally I would be suspicious of the oxygen sensor first.

Jul 21, 2013 | 2002 Toyota Camry

1 Answer

How do i fix p1130 AND P 1440 code on my 2000 Nissan maxima? It takes about 5-6 minutes to crank up.


P1130 Swirl Control Valve Circuit Malfunction - With Automatic Transmission Possible Causes
  • Check for air leaks in the Air Induction system (e.g., in the intake manifold)
  • Check for leaks or looseness in hoses and tubes between the intake manifold, vacuum tank and swirl control valve actuator
  • Check for leaks or looseness in the hoses between the air cleaner assembly and the swirl control valve vacuum check valve
  • Crankshaft position sensor (REF) signal problem
  • MAF sensor has failed (it may be dirty or contaminated)
  • One-way check valve has failed
  • Swirl control valve actuator has failed (it may be damaged or sticking)
  • Swirl control valve control connector is damaged (check pins for damage)
  • Swirl control valve circuit is open, shorted to ground or shorted to voltage
  • Swirl control valve has failed
  • PCM has failed
  • Throttle position sensor has failed
  • Vacuum tank has failed

P1440...EVAP Control System (Small Leak)
Check your fuel cap & reset code,

Good luck, hope this helps,,,

Jul 15, 2011 | 2000 Nissan Maxima

1 Answer

Air/flow senor #1 bank made the check engine light come and the code is p1130


P1130 = Air/Fuel Sensor Circuit Range/Performance (Bank 1 Sensor 1).

Chances are the upstream sensor (similar to an O2 Sensor but not compatible) is shot. However, before condemning the sensor, check the circuit (wiring, connector, etc.) for power, ground, etc. If you can, check fuel trims as well.

If it is the sensor, take your VIN# to the dealership for an exact replacement. Be advised...they don't give 'em away.

Good luck and keep us posted.

Jul 07, 2010 | 2002 Toyota Camry

2 Answers

1999 Camry PO125, P1130, P1135. What should I do? Dont want to more alot into it. It's my sons car at school.


Hello. Sorry to hear about your troubles.

The P-0125 DTC:
Specifically, the "coolant temperature is too low for closed loop operation", This indicates a partially stuck open thermostat; the coolant is not reaching the optimal temperature to allow the computer to use the various sensors on the engine; it is staying in a pre-programmed or defult mde.

The P1130 and the P1135 indicates a bad Air-Fuel sensor.
On a 4 cylinder, this would be the one on the exhaust manifold.

Replace the thermostat and the air/fuel sensor. Try to use Toyota parts; it has been shown that 'aftermarket' sensors do not perform very well in Toyotas. If you buy a 'generic' sensor, the code may remain, and you problm will not be fixed.

Thanks for choosing FixYa for asistance.

Mar 03, 2010 | 1998 Toyota Camry

1 Answer

Check engine code #P1130


air fuel sensor bank 1 sensor 1-ur air-fuel sensor bad connections or is failing

Oct 28, 2009 | 2000 Toyota Camry

1 Answer

Toyota obdII codes (P1130)


P1130 returns the following definition from my Toyota code list:
"Air–Fuel Sensor Circuit Range/Performance"

Sep 07, 2009 | 2000 Toyota 4Runner

1 Answer

I have a 2000 toyota avlon and the check engine light came on.The code is P1130 ,Which part has to be replaced.


p1130 refers to af ratio senor bankone sensor on. If you car has a six cylinder bank one is the side where #1 cylinder is located sensor one is the sensor closest to the engine. hope this helps

Aug 27, 2009 | 2000 Toyota Avalon

1 Answer

1998 camry, 4cyl. P0171, P1130 toruble codes.


Hi.. On your question the definition of the codes are:
P0171, System to lean ( Fuel trim)
P1130, Air / Fuel sensor circuit range ? performance malfuntion This code is exclusive california Emissions). Oxigen sensor Performance malfuntion.
The first step you need to do is Check the Oxigen ( O2 sensor)
Connections The front and the rear one.
Check the condition of the Air filter Replace if need.
Check Spark plug Replace if need.
Check Fuel condition, Replace fuel filter if need.
And Clear the Codes if averything is good.
If the code P1130 return Replace the Air fuel ratio sensor..

Ok.. I hope this help on your question. If need more info letme know.

Thankyou for use fixya...

Jul 26, 2009 | 1998 Toyota Camry

1 Answer

2000 RX 300. Code P1130. I have already replaced the mass air flow sensor on te top of the air intake. The missing stopped but I still have this code. I have cleared the code twice and it still comes back....


P1130 A/F Sensor Circuit Range/Performance Malfunction (Bank 1 Sensor 1). Some possible trouble areas include: open or short in a/f sensor circuit, a/f sensor, air induction system (which it looks like you already checked), fuel pressure, fuel injectors, or your ECM (Engine control Module). I can send you steps to check these but i need your email address cause i can not post them on the internet do to copy right laws.

Jul 11, 2009 | 2000 Lexus RX 300

Not finding what you are looking for?
2000 Toyota Tundra Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...