Question about Ford F-250 Super Duty
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: egr valve location
The EGR Valve Location is typically housed on the intake manifold this schematic may help you
Posted on Mar 07, 2009
SOURCE: Location of EGR Valve
Found the info!!
This Dodge EGR valve is a certain kind of device that is mounted right on your intake manifold which controls the amount of exhaust gasses back into your engine.
On a 2005 Dakota with 4.7 liter engine (non-HO), the EGR valve is located near the intake manifold on the driver's side right up against the firewall. It's hard to spot as it sits lower than the intake manifold. To change it, remove the electrical connector. There's a red tab that needs to be pushed to one side and then you have to squeeze down on a tab to get it free. Using a 13 mm socket, remove the bolt that you can see. I had to use a 3 inch wobble extention and then a 8 inch extension with a deep well socket to reach it with my 3/8 inch ratchet. There's a second bolt that you can't see between the EGR valve and the firewall. With a little trial and error and a lot more luck, you can reach the hidden bolt with the 3 inch wobble extension and a 13 mm deep well socket. Attach the ratchet after the socket is on and remove. This one isn't easy and if there's any Dodge engineers reading this one, a couple of extra inches of clearance between the valve and the firewall wouldn't have killed you no matter what the cost accountants said. With both bolts removed, you should be able to pull out the metal pipe that connects the manifold to the EGR valve out of the manifold (Pull to the right) and then you can lift the valve out. For assembly, the metal pipe connecting the intake manifold the EGR valve has to be removed and reinstalled on the new valve. It's held on with 2 5/16th" bolts. You should put the rear bolt on tight, but leave the front bold loose for the reinstall as some adjustment is necessary to get it put back together and the rear is a pain to tighten when installed. Line up the bolts that attach the valve and get the rear 13 mm bolt (The one you couldn't see on disassembly) started. Do not start the other 13 mm bolt as you'll need to pivot the valve and pipe to the left in order to reinsert the pipe into the intake manifold. Once the pipe is in the intake manifold. Start the other 13 mm bolt and tighten both 13 mm bolts and then the 5/16" bolts holding the pipe onto the valve. Reinstall the electrical connection. Please don't forget to rate!!!!
Posted on Mar 14, 2009
The EGR, or exhaust gas recirculation valve, takes inert exhaust gasses
drawn from the exhaust system and reintroduces them into the combustion
chamber through the intake manifold. This process lowers the peak
combustion temperature and helps combat the formation of Nitrous Oxide
(NOx) in the exhaust.
Posted on Sep 07, 2009
Tips for a great answer:
Dec 13, 2015 | Cars & Trucks
Feb 07, 2012 | 2000 Mercury Sable
Sep 25, 2010 | 2002 Suzuki XL-7
Sep 14, 2010 | 1998 Dodge Ram 1500 4WD
Apr 14, 2010 | 2005 Dodge Ram 1500
Feb 27, 2009 | 2001 Chevrolet Impala
Feb 24, 2009 | 2000 Ford Ranger SuperCab
Feb 05, 2009 | 2005 Dodge Ram 1500
Aug 24, 2008 | 1996 Ford Probe
10 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: