Question about 1997 Mazda Pickup

Open Question

How do i know if clutch safety switch is bad in my 1997 Mazda b2300

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 334 Answers

SOURCE: we need to replace the neutral safety switch on a 1997 Mazda B23

it should near the back of the trans. it will be a two prong plug

Posted on Mar 22, 2009

  • 4669 Answers

SOURCE: I have a 1997 mazda b2300 it is kicking a code of

Check for vacuum leaks. Especially the PCV line. If non are found, clean the MAF.

Posted on Apr 09, 2009

  • 4472 Answers

SOURCE: Failed evap test on 1995 mazda b2300

did u try hoses that go to evap canister? and the evap canister itself? Thanks, Lee

Posted on Jun 05, 2009

  • 24 Answers

SOURCE: How do I disconnect the pressurized fuel line on Mazda B2300

You need a special tool called a fuel line disconnect tool.You should be able to get one for your specific vehicle at an auto parts store.However that is not the correct or safest way to check for a bad fuel pump.Check out this link for more info.

Posted on Jan 31, 2010

  • 2510 Answers

SOURCE: I am looking for a diagram of the fuse box panel

Look inside the fuse box cover, the fuse's layout and designations are usually printed there.

Posted on Mar 09, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My slave cylndr is out my truck is stuck in reverce how do i get it out to drive it home to fix it

if no clutch and you get it in a gear to drive what do you think will happen when you have to stop. you need to be towed

Aug 15, 2015 | Mazda Cars & Trucks

1 Answer

I put a slave cylinder in my 97 mazda but the clutch will still not disengage but it moves the fingers on the clutch

Clutch disk could be in backwards.
Slave cylinder may have an adjustment that needs to be extended.
Pilot bearing could be bad and keeps the pilot shaft spinning. (simulates clutch not disengaging)
Pivot pin of the throw out arm could be worn down.

May 13, 2014 | 2005 Mazda B2300 Regular

1 Answer

Does a 1997 mazda b2300 have a speedometer cable?

It should have a speed sensor in the side of the transmission.

Apr 15, 2013 | 2007 Mazda B2300

2 Answers

My mazda b2300 series pickup 2003 2.3 L. is not starting I turn the key and no contact or anything I cross the hot wires on the starter and it tries to crank but will not start can you help me please

My first guess would have been the clutch switch but that would not prevent the engine from starting.
Something is not making the circuit from the key to the starter solenoid and the coil or computer.
Assuming the key is turning the switch correctly, you would need to troubleshoot the circuits with a meter coming out of the key switch. Its possible the key lock is not actually turning the switch.

Sep 27, 2012 | Mazda B2300 Cars & Trucks

1 Answer

There's an electrical switch on the clutch pedal arm (sort of like a brake lamp switch on the brake pedal arm). What does it do?

One of two things - if the switch closes when you press the pedal, it's an ignition safety requiring the clutch to be pressed when starting the car. If it's closed with the clutch pedal released it's a cruise control safety, so that cruise disengages if you push the pedal in (so the engine doesn't over-rev).

Aug 11, 2011 | 1997 Mazda MX-5 Miata

1 Answer

My 1997 madza b2300 5speed manual shifter 4 cyclinder pickup cant change gears with motor running with engine off can change to any gear whats wrong with truck

Here are some suggestions for you to try.If there is any kind of adjustment try that first.If that doesn't work then I would have your clutch inspected for extreme wear if it hasn't been changed.

Mar 06, 2011 | 2007 Mazda B2300

1 Answer

A/c blower fades when trcuk is accelerated?

There is a vacuum hose ,that most likely has a hole in it ,or the check valve is bad,or vacuum reservoir,look under the hood for these things

May 24, 2010 | 1997 Mazda Pickup

2 Answers

Overdrive light stay on on my 1995 mazda b2300

The light is on because there is a problem in the transmission, have a self test run by Kragen auto or a store like them, they do it for free, let me know the codes.

Nov 26, 2008 | 2007 Mazda B2300

Not finding what you are looking for?
1997 Mazda Pickup Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides